Brinkmann 816-3500 SERIES, 815-3500 owner manual Installation Information, Cylinder Specifications

Page 5
INSTALLATION INFORMATION:

INSTALLATION INFORMATION:

The installation of this appliance must be in accordance with:

All applicable local codes, or in the absence of local codes, either:

•National Fuel Gas Code/ANSI Z223.1/NFPA 54

•Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58

•Natural Gas and Propane Installation Code CSA B149.1

To check your local codes, see your local LP gas dealer or natural gas company. This fryer was not intended to be connected to a natural gas supply line.

CYLINDER SPECIFICATIONS:WARNING

LP GAS CYLINDER (NOT SUPPLIED WITH THIS FRYER)

The LP (Liquid Propane) gas cylinder specifically designed to be used with this fryer must have a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an over-filling protection device (OPD).

•DO NOT connect this fryer to an existing #510 POL cylinder valve with Left Hand threads. The Type 1 valve can be identified with the large external threads on the valve outlet.

•DO NOT connect to a propane cylinder exceeding this capacity.

•DO NOT connect to a cylinder that uses any other type of valve connection device.

CYLINDER SPECIFICATIONS:

When purchasing or exchanging a cylinder for your gas fryer, it must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods as applicable with a listed over-filling prevention device (OPD).

The cylinder must also be equipped with:

•A shut-off valve terminating in a Type 1 gas cylinder valve outlet.

•A Type 1 valve that prevents gas flow until a positive seal is obtained.

•An arrangement for vapor withdrawal.

•A collar to protect the cylinder shut-off valve.

•A safety relief device having direct communication with the vapor space of the cylinder.

•A listed over-filling prevention device (OPD).

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents READ THIS MANUAL ASSEMBLY AND OPERATING INSTRUCTIONSKEEP THIS MANUAL FOR FUTURE REFERENCE Using it in an enclosed space can kill you DANGERCARBON MONOXIDE HAZARD This appliance can produce carbon monoxide which has no odorDo NOT install or use in or on recreational vehicles and/or boats Do NOT use lid when heating or cooking with oilDO NOT use external electrical sources with this appliance CYLINDER SPECIFICATIONS INSTALLATION INFORMATIONFILLING THE LP GAS CYLINDER HOSE AND REGULATOR WHEN TO PERFORM A LEAK TEST CONNECTING HOSE AND REGULATOR TO AN LP GAS CYLINDERLEAK TESTING F Gas supply hose connection to burner assembly GAS LEAK TESTINGA Supply tank cylinder weld B Connection nut to cylinder valve C Back side of connection nut to brass nippleLIGHTING INSTRUCTIONS PRE-START CHECK LIST10 ft 12 ftBURNER FLAME CHECK HOW TO REIGNITE BURNERTURNING OFF THE FRYER 2” 1” 0”OPERATING INSTRUCTIONS HOW TO DETERMINE PROPER AMOUNT OF OILFor Use With Cooking Vessels That Do Not Have Maximum Fill Line 7” Strainer Turkey Stand14” Strainer Pan & BasketNOTE Wear eye protection when cleaning burner BURNER ASSEMBLY/MAINTENANCECLEANING & GENERAL MAINTENANCE FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT ASSEMBLY INSTRUCTIONSPROCEED TO “GAS LEAK TESTING” SECTION ON PAGE Proof of purchase will be required2003 The Brinkmann Corporation Dallas, Texas 75244 U.S.A 90 DAY LIMITED WARRANTYONE YEAR LIMITED WARRANTY
Top Page Image Contents