Radio Shack ET-2105 manual Using the Earphone, Using the Belt Clip

Page 12

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code either.

If the dial tone stops, you have touch-tone service. If the dial tone continues, you have pulse service.

If you have tone service, leave TONE/PULSE set to TONE. If you have pulse service, set TONE/PULSE to PULSE.

4. To hang up, place the keypad on the base or press TALK.

Using the Earphone

1.Insert the earphone’s plug into the jack on the side of the keypad.

2.Place the mono-earphone in either ear.

3.Move the clip along the earphone cord and clip it to your clothing.

When you are not using the earphone, follow these steps:

1.Open the earphone compartment cover by pulling its tabs on both sides.

2.Place the earphone in the compartment.

3.Close the compartment cover.

Using the Belt Clip

You can use the belt clip to hang the keypad on your belt or waist- band for hands-free carrying. To attach the belt clip, snap the up-

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contents Features ET-2105Risk of Electric Shock Do not Open Read this Before Installation FCC Wants YOU to Know Lightning Preparation Selecting a LocationConnecting the Base Connecting, Charging, Replacing the Battery Pack Page Setting the Ringer Setting the Dialing ModeUsing the Earphone Using the Belt ClipOperation Making and Receiving CallsAdjusting the Keypad’s Volume Using RedialChanging Channels Using Mute Using FlashUsing Tone Services on a Pulse Line Using Memory DialingStoring a Number in Memory Entering a Pause in a Memory Number Chain Dialing Service Numbers Testing Stored Emergency NumbersDialing a Stored Number Troubleshooting Problem SuggestionCare Limited One-Year Warranty
Top Page Image Contents