Radio Shack ET-2105 manual Operation, Making and Receiving Calls

Page 13

per side of the clip into the slots on both sides of the keypad. To remove the belt clip, pull out on either side of the clip.

OPERATION

Before you use the phone, place the earphone in either ear and attach the clip to your clothing (see “Using the Earphone” on Page 11).

Making and Receiving Calls

To make a call, lift the keypad from the base, then press TALK. You hear a dial tone and the CHARGE/IN USE indicator on the base and the IN USE/LOW BATT indicator on the keypad light. Dial the number.

To answer a call, lift the keypad from the base, then press TALK. The CHARGE/IN USE and IN USE/LOW BATT indicators light.

To end a call, place the keypad on the base or press TALK.

Notes:

When you press a button, a single tone indicates that the phone has accepted the command. Three tones indicate that you pressed a button in error or there is severe interference. (See “Changing Channels”).

If interference is severe, the keypad might lose communica- tion with the base and the call might disconnect. If this hap- pens, return the keypad to the base for about 5 seconds to reset the security access-protection code.

12

Image 13
Contents Contents ET-2105 FeaturesRisk of Electric Shock Do not Open Read this Before Installation FCC Wants YOU to Know Lightning Selecting a Location PreparationConnecting the Base Connecting, Charging, Replacing the Battery Pack Page Setting the Dialing Mode Setting the RingerUsing the Belt Clip Using the EarphoneMaking and Receiving Calls OperationUsing Redial Adjusting the Keypad’s VolumeChanging Channels Using Flash Using MuteUsing Tone Services on a Pulse Line Memory Dialing UsingStoring a Number in Memory Entering a Pause in a Memory Number Testing Stored Emergency Numbers Chain Dialing Service NumbersDialing a Stored Number Problem Suggestion TroubleshootingCare Limited One-Year Warranty