TROUBLESHOOTING
We do not expect you to have any problem with your telephone, but if you do, these suggestions might help.
Problem | Suggestion | |
|
| |
|
| |
The keypad does | Move the keypad closer to the base. | |
not work. |
| |
Raise the base’s antenna to a vertical position. | ||
| ||
|
| |
| Make sure the phone’s modular cord and the AC | |
| adapter are correctly and securely connected. | |
|
| |
| Make sure the keypad’s battery pack is properly | |
| connected and charged (see “Connecting, Charg- | |
| ing, and Replacing the Battery Pack” on Page 8). | |
|
| |
| Recharge the keypad’s battery pack. | |
|
| |
| Place the keypad on the base for about five sec- | |
| onds to reset the security | |
|
| |
The call is noisy. | Keep the keypad and base away from interfer- | |
| ence sources such as computers, remote control | |
| toys, wireless alarm systems, wireless intercoms | |
| and room monitors, fluorescent lights, and electri- | |
| cal appliances. If the interference is severe, turn | |
| off the device. | |
|
| |
| Move the keypad closer to the base. | |
|
| |
| Hang up and redial the number. | |
|
| |
| Press CH to change the channel. | |
|
| |
The range | Make sure the base’s antenna is raised and is not | |
decreases. | touching a metal surface. | |
|
| |
| Recharge the keypad’s battery pack. | |
|
|
18