Using Your Food Chopper

Before using your food chopper, wash chopping bowl, bowl cover and chopping blade with hot soapy water or in a dishwasher. Rinse thoroughly and dry. Wipe surfaces of chopper base with a damp cloth and dry. NOTE: Do not submerge chopper base in water or put in dishwasher. Do not use abrasive cleaning products on any part of chopper. CAUTION: Be extremely careful while handling and cleaning the chopping blade, as blades are extremely sharp.

1.Place base on dry, level surface. Do not plug cord into electrical outlet until all parts of chopper are assembled and food added.

2.Place chopping bowl onto base with center hub over drive shaft.

Turn bowl clockwise to secure in place.

3.Place chopping blade in bowl over hub, rotating slightly if necessary to drop blade in place.

Bowl Cover

Cover Tab Extension

Chopping Blade Handle Chopping Blade

Chopping Bowl

Center Hub

Slot

Drive Shaft

Base Tower

Chopper Base

LO Speed Button

HI Speed Button

4.Place up to 3 cups of food, cut into 1-inch or smaller pieces, evenly into bowl over chopping blade. Do not attempt to chop more than 3 cups of food at one time, as poor results will be obtained.

5.Place cover onto bowl with tab extension to left of base tower. Turn cover clockwise to secure tab in slot of base. You will hear a “click” when tab is fully engaged in slot. The chopper