Transmitter Base
Front Panel
1
2
3
1STANDBY / ON
Switches the power mode between Standby and On for the transmitter base. This light (left of the STANDBY key) illuminates when the transmitter base is on.
2SYNC 1 LED
Illuminates to indicate that the transmitter base is synchronized with one wireless speaker unit.
3SYNC 2 LED
Illuminates when two or more M812 wireless speaker units are connected and synchronized with the transmitter base. Any speaker that is synchronized can control the system.
Rear Panel
1
2
31 AUX
Connect auxiliary devices (e.g., portable CD players) to 3.5 mm stereo,
2FM
Connect the supplied 75 Ohm FM “T” antenna.
39VDC
Connect the supplied 9V DC/1.6A wall adapter. Connect only the adapter supplied with the M812.
6