Sharp R990J(S), R-980J Before Operating, Getting Started, Clock Setting, Stop/Clear

A42430, SCA/SCNZ R980J/990J(S) O/M

BEFORE OPERATING

*This oven is preset with the INFORMATION GUIDE ON.

To assist you in programming your oven, the information guide will appear in the display. In this manual, the display of information guide is abbreviated.

*When you become familiar with your oven, the information guide can be turned off. Check page 22.

Getting Started

Step	Procedure	Pad Order	Display
1	Plug the oven into a power point and switch
	on the power.
	Ensure the oven door is closed.

	Press the STOP/CLEAR pad so that the	STOP
	oven beeps.
2		CLEAR

Only the dots will remain.

Clock Setting

* To enter the present time of day 11:34 (AM or PM).

Step	Procedure	Pad Order	Display
1	Press the CLOCK pad.	CLOCK
			(operation guide off:	)

Enter the correct time of day by pressing the	1	1	3	4
numbers in sequence.

2

The dots (:) will flash on and off.

3	Press the CLOCK pad again.
	CLOCK

This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45) ERROR will appear in the display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).

If you wish to know the time of day during the cooking, auto start or timer mode, press the CLOCK pad. As long as your finger is pressing the CLOCK pad, the time of day will be displayed.

Stop/Clear

Use the STOP/CLEAR pad to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

7

SCA/SCNZ R980J 1-13 7 04.5.21, 11:27 AM