Multiquip manual MVC-40G Rules for Safe Operation

Page 10

MVC-40G — RULES FOR SAFE OPERATION

CAUTION - Read Manual!

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the MQ Mikasa Model MVC-40G Plate Compactor.

GENERAL SAFETY

DO NOT operate or service this equipment before reading this entire manual.

This equipment should not be operated by persons under 18 years of age.

NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

NEVER operate this equipment when not

feeling well due to fatigue, llness or taking medicine.

NEVER operate this equipment under the influence of drugs or alcohol.

ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the plate compactor.

Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

Manufacture does not assume responsibility for any accident due to equipment modifications.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

NEVER touch the hot exhaust manifold, muffler or cylinder. Allow

these parts to cool before servicing engine or mixer.

High Temperatures – Allow the engine to cool before adding fuel or

performing service and maintenance functions. Contact with hot! components can cause serious burns.

The engine section of this mixer requires an adequate free flow of cooling air. NEVER operate the compactor in any enclosed or narrow

area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the compactor or engine and may cause injury to people. Remember the

plate compactor's engine gives off DEADLY carbon monoxide gas.

ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

NEVER operate the plate compactor in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

Topping-off to filler port is dangerous, as it tends to spill fuel.

Maintain this equipment in a safe operating condition at all times.

ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

PAGE 10 — MVC-40G PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #4 (06/06/07)

Image 10
Contents MVC-40G Page Page Table of Contents Best Deal! Order via Internet Dealers Only Parts Ordering ProceduresOrder via Fax Dealers Only MVC-40G Specifications Compactor Specifications MVC-40G Dimensions MVC-40G Plate Compactor DimensionsMVC-40G Safety Message Alert Symbols Always wear approved respiratory protection when requiredMVC-40G Safety Message Alert Symbols MVC-40G Rules for Safe Operation MVC-40G Rules for Safe Operation Loading and Unloading CraneMVC-40G General Information MVC-40G Components Plate Compactor MVC-40G Components Engine Engine Oil Check MVC-40G InspectionBefore Starting Fuel CheckBelt Check Vibrator Oil CheckPlace the engine fuel valve lever in the on position Place the engine ON/OFF switch in the on positionStarting the Engine Place the throttle lever in the slow position idleMVC-40G Initial START-UP Stopping The EngineMVC-40G Operation OperationDaily Service MVC-40G MaintenanceInspection and Maintenance ServiceTables Check engine oil, seeChecking and Replacing the V-Belt and Clutch Reinstalling the V-beltChanging Vibrator Oil Replacing the V-beltMVC-40G- Preparation for Long -TERM Storage Compactor StorageMVC-40G Troubleshooting Engine MVC-40G Troubleshooting Engine MVC-40G Troubleshooting Plate Compactor QTY. Column NO. ColumnPart NO. Column Remarks ColumnMVC-40G- Suggested Spare Parts To 3 UnitsMachine Safety Decals MVC-40G- Name Plate and DecalsMVC-40G- Nameplate and Decals Part Name QTY RemarksMVC-40G- Base and Handle Assy Part Name MVC-40G-VIBRATING Plate Andvibrator Assy Vibrating Plate MVC-40G- Engine Assy Part Name QTY BELT, A-27 BLUE/RPF-3270Robin EH09-2D Crankcase Assy Valve Guide O/S Robin EH09-2D Camshaft Assy PIN, Spring Robin EH09-2D Crankshaft and Piston Assy Spacer 0.8T Robin EH09-2D Intake Exhaust Assy Valve Spring Robin EH09-2D AIR Cleaner Assy Element SET Robin EH09-2D Muffler Assy Muffler Assy Robin EH09-2D Governor Assy Governor Lever Robin EH09-2D COOLING, and Starting Assy Robin EH09-2D COOLING, Starting Assy 210-49Robin EH09-2D Fueltank Assy Fuel Robin EH09-2D Carburetor Assy Throttle Valve Robin EH09-2D Electric Device Assy FLY Wheel CP Accessory Tool KIT Robin EH09-2D Accessorytool KIT Payment Terms Page Heres HOW to GET Help Your Local Dealer is