Multiquip manual MVC-40G Troubleshooting Plate Compactor

Page 25

MVC-40G — TROUBLESHOOTING (PLATE COMPACTOR)

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Compactor Troubleshooting (Table 9) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant.

TABLE 9. PLATE COMPACTOR TROUBLESHOOTING

	SYMPTOM	POSSIBLE CAUSE	SOLUTION

		Engine speed too low?	Set engine speed to correct RPM.

		Clutch slips?	Check or replace clutch.
	Travel speed too low, and vibration is
	Travel speed too low, and vibration is	V-belt slips?	Adjust or replace V-belt.
	weak.
	weak.	Excessive oil in vibrator?	Drain excess oil and fill to proper level.
		Excessive oil in vibrator?	Drain excess oil and fill to proper level.

		Malfunction in vibrator housing?	Check eccentric, gears and counter
		Malfunction in vibrator housing?	weights.
			weights.

		V-belt slips?	Replace V-belt.

	Does not travel forward.	Clutch slips?	Check clutch springs and shoes.
	Does not travel forward.
		Vibrator locked?	Check vibrator housing (eccentric,
		Vibrator locked?	gears and counterweights)
			gears and counterweights)

MVC-40G PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #4 (06/06/07) — PAGE 25

Image 25

Contents MVC-40G Page Page Table of Contents Best Deal! Order via Internet Dealers Only Parts Ordering ProceduresOrder via Fax Dealers Only Compactor Specifications MVC-40G SpecificationsMVC-40G Plate Compactor Dimensions MVC-40G DimensionsAlways wear approved respiratory protection when required MVC-40G Safety Message Alert SymbolsMVC-40G Safety Message Alert Symbols MVC-40G Rules for Safe Operation Loading and Unloading Crane MVC-40G Rules for Safe OperationMVC-40G General Information MVC-40G Components Plate Compactor MVC-40G Components Engine Before Starting MVC-40G InspectionEngine Oil Check Fuel CheckVibrator Oil Check Belt CheckStarting the Engine Place the engine ON/OFF switch in the on positionPlace the engine fuel valve lever in the on position Place the throttle lever in the slow position idleStopping The Engine MVC-40G Initial START-UPOperation MVC-40G OperationInspection and Maintenance ServiceTables MVC-40G MaintenanceDaily Service Check engine oil, seeChanging Vibrator Oil Reinstalling the V-beltChecking and Replacing the V-Belt and Clutch Replacing the V-belt Compactor Storage MVC-40G- Preparation for Long -TERM StorageMVC-40G Troubleshooting Engine MVC-40G Troubleshooting Engine MVC-40G Troubleshooting Plate Compactor Part NO. Column NO. ColumnQTY. Column Remarks ColumnTo 3 Units MVC-40G- Suggested Spare PartsMVC-40G- Name Plate and Decals Machine Safety DecalsPart Name QTY Remarks MVC-40G- Nameplate and DecalsMVC-40G- Base and Handle Assy Part Name MVC-40G-VIBRATING Plate Andvibrator Assy Vibrating Plate MVC-40G- Engine Assy BELT, A-27 BLUE/RPF-3270 Part Name QTYRobin EH09-2D Crankcase Assy Valve Guide O/S Robin EH09-2D Camshaft Assy PIN, Spring Robin EH09-2D Crankshaft and Piston Assy Spacer 0.8T Robin EH09-2D Intake Exhaust Assy Valve Spring Robin EH09-2D AIR Cleaner Assy Element SET Robin EH09-2D Muffler Assy Muffler Assy Robin EH09-2D Governor Assy Governor Lever Robin EH09-2D COOLING, and Starting Assy 210-49 Robin EH09-2D COOLING, Starting AssyRobin EH09-2D Fueltank Assy Fuel Robin EH09-2D Carburetor Assy Throttle Valve Robin EH09-2D Electric Device Assy FLY Wheel CP Accessory Tool KIT Robin EH09-2D Accessorytool KIT Payment Terms Page Your Local Dealer is Heres HOW to GET Help