Rotel RX-1050 owner manual Tuning Controls

Page 12

RX-1050AM/FM Stereo Receiver

MASTER VOLUME

The MASTER VOLUME control adjusts the level of all output channels simultaneously. Rotate the control clockwise to increase the volume. Ro- tate counterclockwise to decrease the volume. MASTER VOLUME buttons are also available on the RX-1050's handheld remote control.

When you adjust the volume, an indicator in the display shows the volume setting.

MUTE Button

The MUTE button on the remote temporarily turns off the output signal. Push this button once to turn the sound off. A mute indication will appear in the front panel display. Press the MUTE button again to restore previous volume levels.

TONE Controls

BASS and TREBLE controls increase and de- crease the audio signal’s low and high fre- quency content respectively. Rotate clockwise to increase output in the respective frequency range and counterclockwise to reduce it. The center detent removes each control from the audio path for maximum signal integrity.

HEADPHONES Jack

This jack accepts a standard 1/4 inch stereo headphone plug. Use an adaptor if your head- phones have a small mini-plug.

NOTE: Inserting a headphone plug does not automatically disable all speaker outputs. Use the SPEAKER buttons described in the next section to turn the speakers on or off during headphone listening.

12

SPEAKER Buttons and LEDs

The RX-1050 provides output connections for two pairs of speakers: A and B. A pair of SPEAKER buttons independently control which speaker outputs, if any, are active. Press the SPEAKER A button to activate or deactivate the SPEAKER A outputs. Press the SPEAKER B button to activate or deactivate the SPEAKER B outputs.

An LED indicator located to the left of each button lights when that speaker output is acti- vated.

NOTE: For headphone listening, deactivate both the SPEAKER A and SPEAKER B outputs.

MEMORY Button

The MEMORY button is used to confirm and memorize tuner station presets. Its use is de- scribed in detail in the Tuning Controls sec- tion of this manual.

Input Source Buttons

Eight buttons on the right side of the front panel directly select an audio or video input source (PHONO, CD, TUNER, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4) for listening. Push any of these buttons (or the duplicates on the handheld remote) to select the desired source. You will hear this source and, if you have selected a video source, see its picture on your TV monitor. The left side of the front panel dis- play shows the current source selection.

The input source buttons can also be used (with the REC button described in the next sec- tion) to select an analog input source signal to be available at the outputs for recording. Additionally, the input source buttons can be used with the ZONE button to select an analog input source for ZONE 2.

REC Button

ZONE Button

The RX-1050 can record from any source to a recorder connected to the TAPE, VIDEO 1, VIDEO 2 or VIDEO 3 outputs, even while lis- tening to a different input source. To select an input source for recording, press the REC button on the front-panel (or the equivalent ZONE button on the remote). Then, press one of the INPUT SOURCE buttons within 5 seconds to select the signal you wish to record. After making your selection (or if more than five sec- onds passes), the input source buttons return to their normal function, selecting a listening source.

Remember, this selection is independent of the listening source. While recording, you may select a different source (for example, the built- in tuner) for listening. The record selection ap- pears in the display to the right of the listen- ing selection.

Tuning Controls

The RX-1050 features a digital synthesized AM/ FM tuner with 30 station presets. Operation of the tuning functions involves the use of six buttons on the front panel plus the numeric and other buttons on the remote.

BAND Button

TV/BAND Button

The BAND button on the front panel and the TV/BAND button on the remote selects AM or FM mode. Press either button to toggle back and forth between the two modes. An indi- cator at the left portion of the front panel dis- play confirms your choice and the currently tuned station frequency is shown in the main portion of the display.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-1050 Page Important Safety Instructions Controls and Connections RR-939B Remote Control Antenna Connections Loop PRE MON Antenna OUT GND RComputer Phono Tape Video OUTInput Connections Loop PRE MONOUT GND R Zone EXT REMOutput Connections Zone 2 Connections Antenna OUT GND RTape Video OUT Contents Key Features PlacementAbout Rotel Getting StartedBasic Controls Tuning Controls Tuning Buttons CH Tuning Buttons TUNE/PRESET Button Shift TV ButtonNumeric Buttons Station Presets Preset Scanning Shift Mute ButtonsFL Display Control Antenna Connections Accessory Power Outlets North American version AC Input12V Trigger Connections Computer I/O InputZone 2 Power On/Off Operation Controlling Zone 2 from the Main Room Zone ButtonControlling Zone 2 from the Remote Location Zone 2 Audio OutputsSpecifications Protection CircuitPage Rotel of America

RX-1050 specifications

The Rotel RX-1050 is a quintessential stereo receiver that embodies the brand’s commitment to high-performance audio. Designed for audiophiles and casual listeners alike, the RX-1050 stands out for its robust build quality, impressive power output, and a suite of features that make it a versatile addition to any home audio system.

One of the standout characteristics of the RX-1050 is its power amplification. Delivering a solid 100 watts per channel into 8 ohms, this receiver is equipped to drive a wide range of speakers with excellent clarity and dynamic range. The Class AB amplifier design ensures minimal distortion, while the toroidal transformer used in its construction minimizes electrical noise and maximizes efficiency, a hallmark of Rotel engineering.

Connectivity is another strong aspect of the RX-1050. It supports multiple audio inputs, including RCA, optical, and coaxial, allowing users to connect various sources like CD players, turntables, and streaming devices. The receiver also features a built-in AM/FM tuner with a user-friendly interface, enabling easy access to favorite radio stations. For those who enjoy vinyl, the RX-1050 includes a dedicated phono input, ensuring that turntable enthusiasts can connect their systems without needing an external preamp.

Rotel has integrated advanced technologies in the RX-1050 to enhance the listening experience. The receiver features a high-quality digital-to-analog converter (DAC) that ensures accurate signal processing and superior audio fidelity. This technology allows for a rich and immersive soundstage, making it ideal for both music and movies. Furthermore, the RX-1050 supports a range of audio formats, providing flexibility for various media playback.

User experience is prioritized with an intuitive control layout, including a large display that makes it easy to navigate through settings and sources. The remote control adds convenience, allowing users to adjust settings from across the room effortlessly.

In summary, the Rotel RX-1050 is a well-rounded stereo receiver that combines powerful amplification, versatile connectivity, and advanced technologies. Its exceptional sound quality and user-friendly design make it an excellent choice for anyone looking to elevate their audio experience at home. Whether you are an audio purist or simply appreciate high-fidelity sound, the RX-1050 stands as a durable and capable option in the world of home audio.
Top Page Image Contents