60
12
6Repeat steps 4 and 5 to enter up to 8 digits.
7Press [OK].
• The cursor moves to the start of the next field.
8Press the keys in sequence on the Mic keypad to
enter a DTMF number with up to 16 digits.
• You may turn the Tuning control then [aa
aa
a] to select
each digit. Select a space if you want to include a
pause.
9Press [OK] to complete the programming.
10 Press [MNU] to exit Menu mode.
You can confirm the stored DTMF number by using
steps 1 to 3.
The keypad on the MC-53DM also is available to enter
alphanumeric characters in step 4. See page 18.
AUTOMATIC DIALER
If you use the 10 dedicated memory channels to store
DTMF numbers, you need not remember a long string
of digits.
■Storing a DTMF Number in Memory
Note: Audible DTMF tones from other transceivers near you (or
from your own speaker) may be picked up by your microphone.
If so, you may fail to correctly program a DTMF number.
1Press [MNU] to enter Menu mode.
2Select Menu 1–5–1 (STORE), then press [OK].
3Press [cc
cc
c]/ [dd
dd
d] to select from channels 0 to 9,
then press [OK].
• The display for entering a memory name
appears; the first digit blinks.
• To skip naming the channel, press [OK] again.
You can jump to step 8.
4Turn the Tuning control to select a character.
• You can enter alphanumeric characters plus
special ASCII characters.
5Press [aa
aa
a].
• The cursor moves to the next digit.
ciremunahplafostesehtgnomasehctiwS ,)ylnoE007D-MT(sretteldetnecca,sretcarahc .sretcarahcIICSAlaicepsdna neewtebsehctiwS latipacdnallams .srettel
yromeMslecnaC .yrtnEemaN
tatigidehtseteleD sirosrucehthcihw .gniknilb
rosrucehtsesuaC .drawkcabevomot
ehtstresnI detcelesyltnerruc .retcarahc
DNABtfel( )LES
stigidllasraelC ehtskcabdna tsrifehtotrosruc .tigid