AUTO PM CHANNEL STORE

After you recalled a PM channel, this function automatically overwrites the current PM channel with the present operating environment when:

You recall another PM channel.

You press [OFF].

You switch OFF the transceiver.

The factory default of this function is ON.

1Press [MNU] to enter Menu mode.

2Press [c]/ [d] to select “RADIO (1–)”, then press [OK].

3Press [c]/ [d] to select “MEMORY (1–4–)”, then press [OK].

4Press [c]/ [d] to select “AUTO PM STORE (1–4–1)”, then press [OK].

5Press [c]/ [d] to switch the function ON (default) or OFF.

6Press [OK] to complete the setting.

7Press [MNU] to exit Menu mode.

PM CHANNEL RESET

If you want to reprogram the PM channels from the beginning, reset all the PM channels to the factory defaults.

1Press [PM]+ POWER ON.

• A confirmation message appears.

8

• Press [ESC] to quit resetting.

2Press [OK].

You can also use Menu 1–9–7 (RESET) to reset the PM channels. See page 41.

45

Page 51
Image 51
Kenwood TM-D700 E instruction manual Auto PM Channel Store, PM Channel Reset, Press PM+ Power on