38
7
8Repeat steps 6 and 7 to enter up to 8 digits.
9Press [OK] to complete the setting.
10 Press [MNU] to exit Menu mode.
The keypad on the MC-53DM also is available to enter
alphanumeric characters in step 6. See page 18.
Note:
◆
You can also name the Program Scan {page 52} and DTMF
{page 60} channels, but you cannot name the Call channel
{page 39}.
◆
You can assign names only to memory channels in which you have
stored frequencies and related data.
◆
The stored names can be overwritten by repeating steps 1 to 10.
◆
The stored names also are erased by clearing memory channels.
NAMING A MEMORY CHANNEL
You can name memory channels using up to 8
alphanumeric characters. When you recall a named
memory channel, its name appears above the frequency.
Names can be call signs, repeater names, cities, names
of people, etc.
1Recall the desired memory channel.
2Press [MNU] to enter Menu mode.
3Press [cc
cc
c]/ [dd
dd
d] to select “RADIO (1–)”, then press
[OK].
4Press [cc
cc
c]/ [dd
dd
d] to select “MEMORY (1–4–)”, then
press [OK].
5Press [cc
cc
c]/ [dd
dd
d] to select “MEMORY NAME (1–4–4)”,
then press [OK].
• The display for entering a memory name appears; the
first digit blinks.
6Turn the Tuning control to select the first digit.
• You can enter alphanumeric characters plus special
ASCII characters.
7Press [aa
aa
a].
• The cursor moves to the next digit.
ciremunahplafostesehtgnomasehctiwS ,)ylnoE007D-MT(sretteldetnecca,sretcarahc .sretcarahcIICSAlaicepsdna neewtebsehctiwS latipacdnallams .srettel
yromeMslecnaC .yrtnEemaN
tatigidehtseteleD sirosrucehthcihw .gniknilb
rosrucehtsesuaC .drawkcabevomot
yltnerrucehtstresnI .retcarahcdetceles
DNABtfel( )LES
dnastigidllasraelC otrosrucehtskcab .tigidtsrifeht