Kenwood TM-D700 E Changing Speaker Configurations, Speaker Mute, Connection Mode Band a Band B

CHANGING SPEAKER CONFIGURATIONS

This transceiver has two speaker jacks. You can enjoy a variety of speaker configurations by using one or two external speakers. Access Menu 1–2–3 (SPEAKER) and select mode 1 (default) or 2, depending on how the internal and/or external speakers should function.

	Connection	Mode	Band A	Band B
	Only SP1 jack	Mode 1	External	External
	connected with an
		Mode 2	External	External
	external speaker
	Only SP2 jack	Mode 1	External	Internal
14	connected with an
		Mode 2	Internal	External
	external speaker
	Both SP1 and SP2	Mode 1	External 2	External 1
	jacks connected
	with external
		Mode 2	External 1	External 2
	speakers

SPEAKER MUTE

While receiving or transmitting on the TX band, you may not want to hear audio received on the other band. Use this function to mute the speaker allocated to that band (not TX band).

Press [MUTE] to switch the function ON (or OFF).

• “MUTE” appears when the function is ON.

CHANGING TX/RX DEVIATION (TM-D700E ONLY)

This transceiver is capable of switching between wide and narrow deviations to receive or transmit. After selecting the desired band, access Menu 1–3–6 (WIDE/ NARROW) and switch between Wide (default) and Narrow.

•When Narrow is selected, “N” appears beside the frequency.

Note: Do not select Narrow for the band configured as a data band. The selection of Narrow is invalid on the data band.

72