Kenwood TM-D700 E instruction manual Automatic Repeater Offset, A. and Canada versions

AUTOMATIC REPEATER OFFSET

This function automatically selects an offset direction, according to the frequency that you select on the VHF band. The transceiver is programmed for offset direction as shown below. To obtain an up-to-date band plan for repeater offset direction, contact your national Amateur Radio association.

U.S.A. and Canada versions

This complies with the standard ARRL band plan.

144.0		145.5		146.4		147.0		147.6
145.1			146.0		146.6		147.4		148.0 MHz
	S	−	S	+	S	−	+	S	−

	S: Simplex
European versions
144.0		145.6 145.8 146.0 MHz
	S		–	S
	S: Simplex

Note: Automatic Repeater Offset does not function when Reverse is ON. However, pressing [REV] after Automatic Repeater Offset has selected an offset (split) status, exchanges the receive and transmit frequencies.

1Press [MNU] to enter Menu mode.

2Press [c]/ [d] to select “RADIO (1–)”, then press [OK].

3Press [c]/ [d] to select “REPEATER (1–7–)”, then press [OK].

4Press [c]/ [d] to select “AUTO OFFSET (1–7–2)”, then press [OK].

6

5Press [c]/ [d] to switch the function ON (default) or OFF.

6Press [OK] to complete the setting.

7Press [MNU] to exit Menu mode.

31