Kenwood TM-D700 E instruction manual Getting Acquainted, Front Panel

GETTING ACQUAINTED

FRONT PANEL

Note: This section describes only the main functions of the front panel

3 controls and buttons. For the functions not described here, you will find explanations in the appropriate sections of the manual.

qCALLbuton

Recalls the Call channel {page 39}. Also starts or stops Call/VFO Scan {page 54} when in VFO mode, or Call/Memory Scan {page 54} when in Memory Recall mode.

wVFObuton

Selects the VFO mode. In this mode you can change the operating frequency, using the Tuning control or Mic [UP]/ [DWN]. Also provides:

•VFO Scan start to scan the entire VFO range {page 50}.

•Program Scan start to scan a programmed range of frequencies {page 52}.

eMRbuton

Selects the Memory Recall mode {page 37}. In this mode you can change memory channels, using the Tuning control or Mic [UP]/ [DWN]. Also starts Memory Scan {page 50}.

rTuingcontrol

When turned, selects:

•Operating frequencies when in VFO mode {page 20}.

•Memory channels when in Memory Recall mode {page 37}.

•Menu Nos. when in Menu mode {page 22}.

This control is used for various other selections.

When an up-arrow (c) and down-arrow (d) are visible as button labels, the Tuning control functions in exactly the same way as the up- and down-arrow keys.

tMHzbuton

When pressed, selects the MHz mode. In this mode you can change the operating frequency in 1 MHz steps or 10 MHz steps {page 20}, using the Tuning control or Mic [UP]/ [DWN]. Also starts MHz Scan {page 53}.

10