Kenwood TM-D700 E Memory Channels, Simplex & Repeater or ODD-SPLIT Memory CHANNEL?

MEMORY CHANNELS

In memory channels, you can store frequencies and related data that you often use. Then you need not reprogram those data every time. You can quickly recall a programmed channel by simple operation. A total of 200 memory channels are available for bands A and B.

SIMPLEX & REPEATER OR ODD-SPLIT MEMORY CHANNEL?

You can use each memory channel as a simplex & repeater channel or as an odd-split channel. Store only one frequency to use as a simplex & repeater channel or two separate frequencies to use as an odd-split channel. Select either application for each channel depending on the operations you have in mind.

Simplex & repeater channel allows:

•Simplex frequency operation

•Repeater operation with a standard offset (If an offset direction is stored)

Odd-split channel allows:

• Repeater operation with a non-standard offset

Note:

◆Not only can you store data in memory channels, but you can also overwrite existing data with new data.

◆If you have recalled a memory channel on the non-control band

(A or B), you cannot select the same channel on the control band to program data.

The data listed below can be stored in each memory channel:

Parameter	Simplex &	Odd-split
	Repeater
Receive frequency	Yes	Yes
Transmit frequency		Yes
			7
Tone frequency	Yes	Yes
Tone ON	Yes	Yes
CTCSS frequency	Yes	Yes
CTCSS ON	Yes	Yes
DCS code	Yes	Yes
DCS ON	Yes	Yes
Offset direction	Yes	N/A
Offset frequency	Yes	N/A
Reverse ON	Yes	N/A
Frequency step size	Yes	Yes
Memory channel lockout	Yes	Yes
Memory channel name	Yes	Yes
FM/ AM mode selection	Yes	Yes

Yes: Can be stored in memory.

N/A: Cannot be stored in memory.

35