Furuno FAR-2827, FAR-2127-BB, FAR-2117-BB, FAR-2817 Initializing Tuning, Echo menu

3. SETTING AND ADJUSTMENT

3.2Initializing Tuning

1.Transmit the radar on 48 nm range and rotate the GAIN knob to show 70-80 of the gain bar.

2.Roll the trackball to choose the MENU box at the right side of the screen and then push the left button.

3.Roll the wheel to choose 1 ECHO and then push the wheel.

[ECHO]

1BACK

22ND ECHO REJ OFF/ON

3TUNE INITIALIZE

4PM

OFF/ON

5SART OFF/ON

6WIPER OFF/1/2

7ECHO AREA* CIRCLE/WIDE/ALL

8[PICTURE SELECT]

9STC RANGE

+00

Bold: Default settings

(Same for all menu illustrations)

*: non IMO-type only

ECHO menu

4.Roll the wheel to choose 3 TUNE INITIALIZE.

5.Push the wheel to initialize automatic tuning.

After a while, echoes appear on the screen. The message “TUNE INITIALIZE” appears in red during automatic tuning. When this message disappears, the tuning is completed. If necessary adjust the GAIN to show echoes clearly.

6.Push the right button twice to close the menu.

3-2