3. SETTING AND ADJUSTMENT
3.7.2Specifying Sector Width and Length
When 2 DUAL RADAR in the DUAL RADAR menu is set for "COMBINE", specify
the width and length of the sector from the external radar to display on own radar.
1.Open the INITIALIZE menu.
2.Press the [3] key to show the SCANNER menu.
3.Select 9 [DUAL RADAR] and push the left button.
4.Select 3 COMBINE MODE and push the left button.
5.Select OWN or EXT and push the left button.
OWN: Set own radar’s antenna as reference point and set display area of own radar. The area outside that set here is where the image from the external radar will be displayed.
EXT: Set external radar’s antenna as reference point and set display area of external radar. The area outside that set here is where the image from own radar will be displayed.
Radar selected for COMBINE: External | Radar selected for COMBINE: Own | ||
START: | 315 degrees | START: | 45 degrees |
ANGLE: | 90 degrees | ANGLE: | 270 degrees |
START: | 00.00 nm | START: | 00.00 nm |
LENGTH: | 99.99 nm | LENGTH: | 99.99 nm |
| Picture from |
|
|
| external radar |
|
|
| Position of antenna |
| |
| for external radar |
|
|
| Position of antenna |
|
|
| for own radar |
|
|
| Picture from |
|
|
| own radar |
|
|
6. Select 4 COMBINE SECTOR and push the left button.
