3. SETTING AND ADJUSTMENT
3.Read the target bearing.
4.Measure the bearing of the stationary target on the navigation chart and calculate the difference between actual bearing and apparent bearing on the radar screen.
5.Press the [MENU] key to show the main menu.
6.While pressing and holding down the [HL OFF] key, press the [MENU] key five times.
7.Press the [0] key to show the [INITIALIZE] menu.
[INITIALIZE]
1BACK
2[ECHO ADJ]
3[SCANNER]
4[INSTALLATION]
5[OWN SHIP INFO]
6[TT PRESET]
7[NETWORK]
8[OTHER]
9[FACTORY]
Note: See next page to access the INITIALIZE menu with the trackball style control unit
8. Press the [2] key to open the [ECHO ADJ] menu.
[ECHO ADJ]
1BACK
2CABLE ATT ADJ AUTO/MANUAL 30
3HD ALIGN 000.0°
4TIMING ADJ
0
5MBS 0
6DEFAULT ANT HEIGHT 5/7.5/10/15/20/ 25/30/35/40/45/ more 50 m
7NEAR STC CURVE 2/2.5/3/3.5/4.2
8MID STC CURVE
3/4/5/6
9FAR STC CURVE 6/7/8
0RING SUPPRESSION 0
ECHO ADJ menu
9.Press the [3] key to choose the HD ALIGN option.
10.Key in the bearing difference. The setting range is 0 to 359.9°.
11.Confirm that the target echo is displayed at correct bearing on the screen.
12.Press the [MENU] key to finish.
