3. SETTING AND ADJUSTMENT
Note 2: In the dual radar display, a guard zone set on the main radar is also accommodated on the external radar. When the position of the antennas for the main and external radars is different and the No. 2 guard zone is set on a
A guard zone cannot be set while the dual radar display is active. Set a zone before activating the dual radar display.
1.Open the INITIALIZE menu. See page
2.Press the [3] key to show the SCANNER menu.
3.Select 9 [DUAL RADAR] and push the left button.
[DUAL RADAR]
1BACK
2DUAL RADAR OFF/MIX/COMBINE
3COMBINE MODE* OWN/EXT
4COMBINE SECTOR* START 000° ANGLE 000°
5COMBINE RANGE* START 00.00NM LENGTH 00.00NM
6EXT RADAR 1/2/3/4
*Shown when 2 DUAL RADAR is set for other than "MIX".
4.Select 2 [DUAL RADAR] and push the left button.
5.Select OFF, MIX or COMBINE as appropriate and push the left button. For MIX and COMBINE, the ANTENNA box at the top
OFF: | Turn off the dual radar display. |
MIX: Overlay whole external radar image on main radar image. | |
COMBINE: | Display a part of the external radar image in the window on the main radar. |
Note: For the MIX display, the echo colors are as follows, regardless of echo color settings:
Orange:An echo existing on both the main radar and the external radar.
Yellow: An echo only appearing on the main radar.
Yellow/Green: An echo only appearing on the external radar.
