3. SETTING AND ADJUSTMENT
TT PRESET menu setting
Open the TT PRESET menu by pressing [6] key on the INITIALIZE menu.
[TT PRESET]
1BACK
2TT DATA OUTPUT OFF/TTM/TTD REL/TRUE 4800/9600/ 19200/38400
3MAX RANGE 24/32
4ECHO LEVEL
16
5QV DISPLAY OFF/ON
6TT W/O GYRO*
OFF/ON
7[TT PRESET]
8[TRACK PRESET]
9[TT SENSOR DATA]
0DEFAULT
| [TT PRESET] |
1 | BACK |
2 | LAND SIZE |
| 1600 M |
3 | ANT SELECT |
| XN12AF/XN20AF/ |
| XN24AF/XN4A/XN5A |
| SN30AF/SN36AF/ |
| SN4A/SN5A |
4 | AUTO ACQ CORRE |
| 5 SCAN |
5 | AUTO ACQ WEED |
| 1 SCAN |
6 | [TT DETAIL DATA] |
[TRACK PRESET]
1BACK
2GATE SIZE S/ M /L/LL
3FILTER RESPONSE 1/ 2 /3/4
4LOST COUNT
9 SCAN
5MAX SPEED
100KTS
6TRACKING MODE
1/2/3/4
7START TIME TGT VECT TIME /SCAN
50SEC
20 SCAN
*: Not on IMO radar
TT DATA OUTPUT
Set the output format from J619 (sentence, bearing and baud rate) of tracked targets.
Sentence: | (OFF: No output, TTM: Tracked target information, TTD: Tracked target data) |
Bearing: | REL: Target bearing from own ship, degree relative, |
| target course, degree relative. |
| TRUE: Target bearing, degree true, target course, degree true. |
Baud rate: (4800, 9600, 19200 or 38400 bps)
NOTE: The TT DATA OUTPUT port changes according to the setting for INS as described
on page |
|
Output from J619 port only | |
Output from J619 and J620 (TTM only) ports | |
Output from J619 and NETWORK (TTM only) ports |
MAX RANGE
Choose the target tracking range, 24 or 32 nm.
ECHO LEVEL
Set the detection level of echoes. The setting range is 1 to 31.
QV DISPLAY
OFF: Normal picture
ON: Quantized picture; always off at power on
