Furuno FAR-2817, FAR-2827, FAR-2127-BB, FAR-2117-BB Performance Monitor PM-31, Gasket

4. INSTALLING OPTIONAL EQUIPMENT

4.4 Performance Monitor PM-31

This kit is installed in the antenna unit of the FAR-2107/2807 series X-band radar to monitor radar performance.

Name:		Performance monitor
Type:		PM-31
Code no.:		008-080-438
	Name		Type	Code number	Qty
	SCANNER COVER ASSY.		PM-31	008-539-430	1
	GREASE		GASKET GREASE #2	000-149-704	1
			50G
	SM-XH CONNECTOR		03-2108 6P-6P)	008-534-840	1
	ASSY.
	LIFTING FIXTURE		03-001-3264	300-132-640	1
	GASKET		03-001-3263	300-132-631	1

Procedure
To hoist the scanner cover assy. to the radar mast, by using rope, attach the lifting fixture	to
the scanner cover assy. .

1.Remove the bolt and chain at the bottom of the stern-side cover, and then remove the cover.

2.Coat the bolt hole on the scanner cover assy. with silicone sealant (Adhesive 1211) and secure the chain with the bolt.

3.Remove the cover at the bow side also.

4.	Insert the XH connector of the SM-XH connector		assy. to J911 on TB board 03P9349
	and the SM connector of the SM-XH connector assy. to the relay plate.
5.	Coat the gasket	with the gasket grease #2 50G	and attach it to the scanner cover
	assy. .

6.Connect the cable assembly coming from the scanner cover assy. to the SM connector attached at step 4 above.

7.Attach the scanner cover assy. to the stern side of the antenna unit.

8.Reattach the bow-side cover.

4-15