3.SETTING AND ADJUSTMENT

7.Use the scrollwheel to set START and ANGLE, referring to the description and example below. Spin the scrollwheel to set and push it to confirm.

A solid green line marks the dual radar display area.

START: Start point of the sector (in degrees, 000-359)

ANGLE: Width of the sector (in degrees, 000-359)

In the example below, START is 130° and ANGLE is 100°.

Width of sector

START

ANGLE(Example: 130°)

(Example: 100°)

8.Select 5 COMBINE RANGE and push the left button.

9.Use the scrollwheel to set START and LENGTH, referring to the example below. Spin the scrollwheel to set and push it to confirm.

START: Set range start point.

LENGTH: Set length of sector.

START

LENGTH

Example:

START: 01.00 nm

LENGTH: 02.00 nm

Push the right button four times to close the menu.

3-20

Page 58
Image 58
Furuno FAR-2827, FAR-2127-BB, FAR-2117-BB, FAR-2817 installation manual Push the right button four times to close the menu