Sony SLV-E580EG Tuning your TV to the VCR continued, To check to see if the TV tuning is correct

Step 4 : Tuning your TV to the VCR (continued)

5 – PROGRAM + Press PROGRAM +/– (repeatedly) to select the correct TV system. If you watch the system B/G, select “G.” If you watch the system D/K, select “K.”

6	Tune the TV to the same channel as that
	shown in the display window so that the
	picture on the right appears on the TV
	screen.

Refer to your TV manual for tuning instructions.

If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.

SONY VIDEO CASSETTE RECORDER

7 Press RF CHANNEL.

RF CHANNEL	You have now tuned your TV to the VCR. Whenever you want to
	play a tape, set the TV to the video channel.

To check to see if the TV tuning is correct

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the TV tuning is correct.

To obtain a clear picture from the VCR

If the picture does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL in step 2, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.

Note

• If you set the wrong TV system, you may have no sound or sound may be distorted.

12

Getting Started