Sony SLV-E580EG manual Setting up the remote commander continued, Code numbers of controllable TVs

Step 2 : Setting up the remote commander (continued)

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

To make wide mode settings, see the footnotes below this table for the applicable code numbers.

Manufacturer	Code number
Sony	01*1, 02, 03, 04, 05
Aiwa	32
Akai	68
Blaupunkt	10, 21
Brionvega	40
C.G.M	09
Colonad	03
Dual	44
Emerson	03, 04
Fenner	30, 31
Ferguson	52
Gold Star	03, 04, 17
Grundig	10*1, 11*1
Hitachi	24
Hyper	31
Inno-Hit	41
Irradio	20
ITT	15, 16, 69*3
JVC	33*1
Loewe	45
Mitsubishi	27*1, 28*1, 50*1, 51*1
Mivar	09

Manufacturer	Code number
NEC	66
Nokia	15, 16, 69*3
Nordmende	35, 42
Orion	47, 48
Panasonic	17*1, 49
Philips	06*1, 07*1, 08*1
Phonola	18, 19
Pioneer	26
Saba	12, 13
Samsung	22, 23
Sanyo	25
Schneider	46
Seleco	14
Sharp	29
Siemens	39
Sinudyne	37
TEAC	67
Telefunken	36
Thomson	43*2
Toshiba	38

White Westinghouse 34

*1 Press WIDE to switch the wide picture mode on or off.

*2 Press WIDE, then press VOL +/– to select the wide picture mode you want.

*3 Press WIDE. The menu appears on the TV screen. Then, press CURSOR >/./?/

/to select the wide picture you want and press OK.

Notes

•If the TV uses a different remote control system from the one programmed to work with the VCR, you cannot control your TV with the remote commander.

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Reset the appropriate code number.

8

Getting Started