Sony SLV-E580EG manual Setting up ShowView for satellite broadcasts, Press OK

Turn on the satellite tuner.

Press MENU, then select SETTINGS and press OK. Select TUNER, then press OK.

3

• CURSOR

Press CURSOR >/. to move the cursor (Ó) to the row on which you want to set the guide channel.

To display other pages for programme positions 6 to 60, press CURSOR >/. repeatedly.

SHOWVIEW
PROG	CH	GUIDE CH
1	C0 3	– – –
2	C0 9	– – –
3	C1 2	[ – – – ]
4	C2 7	– – –
5	C5 6	– – –

SELECT	:
SET	: 0 – 9
CANCEL	: CLEAR

4	1	2	3
	4	5	6
	7	8	9
		0

Press the programme number buttons to enter the guide channel number assigned in the programme guide.

SHOWVIEW
PROG	CH	GUIDE	CH
1	C0 3	– – –
2	C0 9	– – –
3	C1 2	[	3 ]
4	C2 7	– – –
5	C5 6	– – –
SELECT		:
SET		: 0 – 9
CANCEL		: CLEAR

Getting Started

5		To set the guide channel of another station, repeat steps 3 to 4.
6	• OK	Press OK.

Setting up ShowView for satellite broadcasts

When your satellite tuner is connected via the AERIAL IN connector, first you have to set the programme position for each satellite channel using the TUNER menu. Then set the guide channel number for each satellite channel using the SHOWVIEW menu.

If your satellite tuner is connected via the LINE-1 (TV) connector, you don’t have to set programme positions nor guide channel numbers for satellite channels. Skip the following procedure.

1

2

3

4 Press PROG +/– to select a programme position you want to use for watching a satellite channel.

continued

Getting Started

25