Rotel RSX-1067 owner manual Specifications

Page 40

RSX-1067Surround Sound Receiver

Specifications

Audio

Continuous Amplifier Power (seven channels driven)

100 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)

Continuous Amplifier Power (two channels driven)

120 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)

Total Harmonic Distortion <0.05%

Intermodulation Distortion (60 Hz:7 kHz) <0.05%

Frequency Response

10 Hz – 120 kHz, ±3dB (analog bypass)

10 Hz – 95 kHz, ±3dB (digital input)

Signal to Noise Ratio (IHF A-weighted) 95dB (analog bypass)

92dB (Dolby Digital, dts) 0dBFs

Input Sensitivity/Impedance

Line Level: 200 mV/100K ohms

Preamp Output Level/Output Impedance 1.0 V / 1K ohms

Contour (LF/HF)

±6dB at 50 Hz/15 kHz

Decodable Digital Input Signals

Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, LPCM (up to 192K), HDCD, MP3, MPEG Multichannel

Video

Frequency Response

3 Hz – 10 MHz, ± 3dB (Digital Input)

3 Hz – 100 MHz, ± 3dB (Component Video)

Signal to Noise Ratio 45dB

Input Impedance

75 ohms

Output Impedance

75 ohms

Output Level

1.0 volt

40

FM Tuner

Usable Sensitivity 14.2dBf

Signal to Noise Ratio (at 65dBf) 70dBf

Harmonic Distortion (at 65dBf) 0.03%

Stereo Separation (1 kHz) 45dB

Output level 1 V

Antenna Input

75 ohms unbalanced

AM Tuner

Sensitivity

500 μV/m

Signal to Noise Ratio 40dBf

Output level 500 mV

Antenna Input

Loop Antenna

General

Power Consumption: 990 watts (max)

130 watts (idle)

19 watts (standby)

Power Requirements (AC) 115 volts, 60Hz (USA version) 230 volts, 50Hz (CE version)

Weight

20.4 Kg/44.97 lb.

Dimensions (W x H x D) 432 x 189 x 427 mm 17.01" x 7.44" x 16.81"

Front Panel Height

(feet removed for rack mount)

176 mm / 6.93"

When sizing openings in custom cabinets, measure the unit to be installed and/or allow at least 1 mm clearance on all sides for unit to unit tolerances.

All specifications are accurate at the time of printing. Rotel reserves the right to make improve- ments without notice.

Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.

Image 40

Contents RSX-1067 Page FCC Information Important Safety InstructionsConsult your authorized Rotel retailer for assistance RSX-1067Surround Sound Receiver Controls and ConnectionsEnglish RR-1050 RemoteOn-Screen Menus HF CONTOUR+5 LF Contour Main MenuContents Other Settings SpecificationsZone 2 Operation Menu BasicsKey Features PlacementAbout Rotel Getting StartedCD Inputs Tape InputsTape Outputs Video 1-5 Audio InputsSpeaker Outputs Preamp OutputsZone 2 Audio Outputs Composite Video InputsDigital Audio Input & Outputs Other ConnectionsMaking Connections Cable, Satellite, or Hdtv Tuner Audio RecorderVCR or Digital Video Recorder DVD-A or Sacd PlayerConnecting a Subwoofer AmplifiersAM Antenna FM AntennaUsing the RR-1050 Audio Button Front-panel DisplayRemote Sensor Programming the RR-1050 Preload ButtonStandby Button Power Button Volume Knob Volume ButtonSurround Mode Buttons ON/OFF ButtonsBasic Operations Selecting InputsOverview Surround Formats Selecting a Source Input from the Front PanelSelecting a Source from the Remote Selecting Digital InputsDolby Digital DTS DTS 96/24DTS Neo6 Dolby Digital Surround EXDolby Pro Logic 7.1 Channel Surround Rotel XS 7.1 Channel SurroundDSP Music Modes 2Ch/5Ch/7Ch Stereo FormatsManually Selecting Surround Modes ModesDolby Digital 5.1 discs Dolby Digital Surround EX discs DTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discs Dolby Digital 2.0 discsMpeg Multichannel discs Digital Stereo discs PCM, MP3, and Hdcd Analog StereoOther Settings Group DelayContour/Tone Settings Speaker LevelNumeric Buttons Station Presets Normal Frequency tuningTuner Controls Cinema EQRDS and Rbds Tuning Zone 2 Operation To change the Zone 2 volume Controlling Zone 2 from the Main RoomControlling Zone 2 from the Remote Location To turn Zone 2 on or offConfiguring Inputs Menu BasicsEnglish Multi Input Setup Dolby Pro Logic II Buttons to change the selected parameter as followsConfiguring Understanding Speaker ConfigurationSpeaker Setup Center Speakers large/smallAdvance Speaker Setup Speakers to be configured with custom settingsSurround Speakers large/small Center Back Speakers large1Test Tone Subwoofer SetupCrossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFF Delay Setup Contour SetupCalibration with an SPL meter Speaker front/center/surround/cenZone 2 Setup Other OptionsDefault Setup To change the Front Redirect settingTo memorize User Default settings To activate memorized User DefaultTroubleshooting Specifications Rotel Europe Rotel of AmericaRotel Deutschland