Rotel RSX-1056 owner manual DVD Player, Audio Recorder, DVD-A or Sacd Player

Page 19

Making Connections

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

Cable, Satellite, or HDTV Tuner

VCR or Digital Video Recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD Player

See Figure 7

Connect the left and right analog outputs from the CD player to the AUDIO IN jacks labeled CD (left and right).

Optional: Connect the digital output of the CD player to any of the Optical or Coax digital inputs on the RSX-1056. Use the INPUT SETUP screen to assign that digital input to the CD source.

There are no video connections for a CD Player.

DVD Player

See Figure 9

DVD connections can be made to the VIDEO 1, 2, 3, 4, or 5 inputs. In elaborate systems, you may wish to use VIDEO 4 or VIDEO 5 for DVD players, since these inputs do not have corresponding OUTPUT connections. If you choose VIDEO 1, make sure that you use VIDEO 1 inputs and outputs for all analog audio and video connections.

Connect a video cable (Composite Video, S-Video, and/or Component Video from the output of the DVD player to the appropriate VIDEO IN 1–5 input. If you intend to use the progressive scan feature with an HDTV moni- tor, you should use Component Video connec- tions.

Connect the digital output of the DVD player to any one of the OPTICAL IN or COAXIAL IN digital inputs on the RSX-1056. Use the INPUT SETUP screen to assign that digital in- put to the same video input source used above. For example, if you use the Video 4 inputs above, assign the digital input to the VIDEO 4 input.

If you want to record the audio signal from the DVD player, connect the left and right analog outputs from the DVD player to the left and right AUDIO IN jacks corresponding to the VIDEO IN input selected above.

See Figure 5

TV tuner connections can be made to the VIDEO 1, 2, 3, 4, or 5 inputs. In elaborate systems, you may wish to use VIDEO 4 or VIDEO 5 for TV tuners, since these inputs do not have corresponding OUTPUT connections. If you choose VIDEO 1, make sure that you use VIDEO 1 inputs and outputs for all analog audio and video connections.

Connect a video cable (Composite Video, S-Video, and/or Component Video) from the output of the TV tuner to the appropriate VIDEO IN 1–5 input. For HDTV signals, you should use Component Video connections.

Connect the left and right analog outputs from the TV tuner to the left and right AUDIO IN jacks corresponding to the VIDEO IN input se- lected above.

Optional: Connect the digital output of the TV tuner to any one of the OPTICAL IN or COAXIAL IN digital inputs on the RSX-1056. Use the INPUT SETUP screen to assign that digital input to the same video input source used above. For example, if you use the Video 4 inputs above, assign the digital input to the VIDEO 4 input.

Audio Recorder

See Figure 8

Connect the left and right analog outputs from an audio tape deck to the AUDIO IN jacks labeled TAPE IN (left and right).

Connect the left/right AUDIO OUT/TAPE OUT jacks to the inputs on the audio tape deck.

Optional: For a digital recording device, con- nect the digital output of the recorder to one of the OPTICAL IN or COAXIAL IN digital inputs on the RSX-1056. Use the INPUT SETUP screen to assign that digital input to the TAPE source. If the recording device accepts a digital re- cording input, connect one of the OPTICAL OUT or COAXIAL OUT connections to the digital input of the recorder.

No video connections are required for an audio recording device.

See Figure 6

VCR connections can be made to the VIDEO 1, VIDEO 2, or VIDEO 3 inputs and outputs. If you choose VIDEO 1, make sure that you use VIDEO 1 inputs and outputs for all ana- log audio and video connections.

Connect video cables (Composite Video, S-Video, and/or Component Video) from the output of the VCR to the appropriate VIDEO IN 1–3 input. If you choose S-Video or Com- ponent Video connections, you should also make a standard Composite Video connec- tion so that the TV signals can be displayed on the RSX-1056 front panel display.

Connect video cables (Composite Video and/ or Component Video) from the VIDEO OUT jacks to the VCR inputs.

Connect the left and right analog outputs from the VCR to one pair of the AUDIO IN jacks labeled VIDEO 1–3.

Connect the left and right AUDIO OUT jacks for VIDEO 1–3 to the analog inputs on the VCR.

Optional: For a digital recording device, con- nect the digital output of the recorder to one of the OPTICAL IN or COAXIAL IN digital inputs on the RSX-1056. Use the INPUT SETUP screen to assign that digital input to the VIDEO source (VIDEO 1, 2, or 3) used for the previous con- nections. If the recording device accepts a digital recording input, connect one of the OPTICAL OUT or COAXIAL OUT connections to the digital input of the recorder.

DVD-A or SACD Player

See Figure 10

To hook up a DVD-A, an SACD player, or any external surround decoder, use audio RCA cables to connect the outputs of the player to the RCA jacks labeled MULTI INPUT, making sure that you observe proper channel consis- tency, i.e. connect the right front channel to the R FRONT input, etc. Depending on your sys- tem configuration, make six connections (FRONT L & R, SURROUND L & R, CENTER, and SUB- WOOFER), seven connections (adding a CEN- TER BACK connection), or eight connections (adding two CENTER BACK connections).

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RSX-1056 10 cm FCC Information Important Safety InstructionsControls and Connections RSX-1056Surround Sound ReceiverRR-1050 Remote EnglishRSX-1056 Surround Sound Receiver Connecting the SpeakersConnecting Cable, Satellite, or Hdtv Connecting the TVConnecting a CD Player/CDR Recorder Connecting a VCRConnecting a DVD Player Connecting an Audio RecorderConnecting AM and FM antennae Connecting a DVD-A or Sacd PlayerHF CONTOUR+5 LF Contour Main Menu On-Screen MenusContents Menu Basics SpecificationsUnpacking Key FeaturesTape Outputs PlacementCD Inputs Tape InputsMulti Inputs Video 1-5 Audio InputsVideo 1-3 Audio Outputs Speaker OutputsDigital Audio Input & Outputs Other Connections Audio Recorder DVD PlayerDVD-A or Sacd Player Speakers Connecting a SubwooferRedirect Feature TV MonitorFront-panel Display Front Panel OverviewAM Antenna FM AntennaSLT Button Standby Button Power ButtonUsing the RR-1050 Audio Button Volume Knob Volume ButtonBasic Operations Selecting Inputs DTS DTS 96/24 Overview Surround FormatsDolby Surround Dolby Pro Logic Dolby DigitalDolby Pro Logic 7.1 Channel Surround DTS Neo6Dolby Digital Surround EX 7.1 Channel SurroundManually Selecting Surround Modes ModesDolby Digital 2.0 discs Dolby Digital 5.1 discs Dolby Digital Surround EX discsDTS 5.1 discs DTS 96/24 discs DTS-ES 6.1 discs Digital Stereo discs PCM, MP3, and Hdcd Mpeg Multichannel discsAnalog Stereo Dynamic Range Other SettingsGroup Delay Speaker LevelTuner Controls Contour/Tone SettingsTo adjust the contour settings from the remote Normal Frequency tuningNumeric Buttons Station Presets TA Button Disp ButtonPTY Button TP ButtonControlling Zone 2 from the Remote Location Zone 2 Power On/OffZone 2 Operation Controlling Zone 2 from the Main RoomNavigation Buttons Menu BasicsSystem Status Input Setup Configuring InputsMain Menu Dolby Pro Logic II Multi Input SetupUnderstanding Speaker Configuration ConfiguringAdvance Speaker Setup Speaker SetupCrossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFF Subwoofer SetupTest Tone Delay SetupCalibration with an SPL meter Other Options Contour SetupSpeaker front/center/surround/cen To restore the Factory Default set Zone 2 SetupDefault Setup To change the Front Redirect settingTroubleshooting Specifications Rotel Europe Rotel of AmericaRotel Deutschland
Top Page Image Contents