Specifications
Audio
Continuous Amplifier Power (five channels driven)
75 watts/ch
Continuous Amplifier Power (two channels driven)
100 watts/ch (1kHz, <1.0% THD, 8 ohms, DIN)
Total Harmonic Distortion <0.09%
Intermodulation Distortion (60 Hz:7 kHz) <0.05%
Frequency Response
10 Hz – 120 kHz, ±3dB (analog bypass)
10 Hz – 95 kHz, ±3dB (digital input)
Signal to Noise Ratio (IHF
92dB (Dolby Digital, dts) 0dBFs
Input Sensitivity/Impedance
Line Level: 200 mV/100K ohms
Preamp Output Level/Output Impedance 1.0 V / 1K ohms
Contour (LF/HF)
±6dB at 50 Hz/15 kHz
Decodable Digital Input Signals
Dolby Digital, Dolby Digital EX, DTS,
Video
Frequency Response
3 Hz – 10 MHz, ± 3dB (Digital Input)
3 Hz – 100 MHz, ± 3dB (Component Video)
Signal to Noise Ratio 45dB
Input Impedance 75 ohms
Output Impedance
75 ohms
Output Level
1.0 volt
45 | English |
FM Tuner
Usable Sensitivity 14.2dBf
Signal to Noise Ratio (at 65dBf) 70dBf
Harmonic Distortion (at 65dBf) 0.03%
Stereo Separation (1 kHz) 45dB
Output level 1 V
Antenna Input
75 ohms unbalanced
AM Tuner
Sensitivity
500 μV/m
Signal to Noise Ratio 40dBf
Output level 500 mV
Antenna Input
Loop Antenna
General
Power Consumption:
450watts
78watts (idle)
8watts (standby)
Power Requirements (AC) 115 volts, 60Hz (USA version) 230 volts, 50Hz (CE version)
Weight
17.2 Kg/37.8 lb.
Dimensions (W x H x D) 432 x 162 x 442 mm 17.01" x 6.38" x 17.40"
Front Panel Height
(feet removed/for rack mount)
150 mm / 5.91"
When sizing openings in custom cabinets, measure the unit to be installed and/or allow at least 1 mm clearance on all sides for unit to unit tolerances.
All specifications are accurate at the time of printing. Rotel reserves the right to make improve- ments without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.