FoodSaver Vac1050 Insert the other end of the acces, Sory hose into the hole on the top

Page 10

T H E F O O D S AV E R U S E R M A N U A L

How to Vacuum Package Using FoodSaver

Bulk Storage and Square Canisters

FoodSaver Bulk Storage and Square Canisters are a great way to store food in your refrigerator and pantry. The Square Canister is also ideal for marinating.

FoodSaver Canisters cannot be stored in the freezer. The Bulk Storage and Square Canister bases can be used in the microwave to reheat foods and put in the dishwasher for cleaning. Do not put the lids in the microwave or dishwasher.

1Place the Vac 1050 on a flat, dry surface and plug the power cord into a standard electrical outlet.

2Place the item(s) to be vacuum packaged inside the canister. Leave at least one inch between the contents and the rim of the canister.

3The canister lid is labeled “Open,”

“Vacuum,” and “Closed.” Turn the knob on the canister lid so the arrow points to “Vacuum.”

4Place the lid on top of the canister.

5

Insert one end of the accessory

 

hose into the accessory port on the

 

Vac 1050.

6

Insert the other end of the acces-

 

sory hose into the hole on the top

 

of the canister.

T H E F O O D S AV E R U S E R M A N U A L

7Lock the lid by pulling the locks forward on both sides until they

snap into place. (You may need to press down lightly on the stars while pulling the locks forward.)

8Press and release the On button.

The lights will turn on in sequence as the Vac 1050 starts the vacuum cycle and air is removed from the canister. The sound will stop and the lights will turn off when vacuum packaging is complete.

9Turn the knob on the canister lid so the arrow points to “Closed.”

10Vacuum packaging is complete.

IMPORTANT: Remember to remove the accessory hose from the accessory port on the Vac 1050 before you vacuum package in FoodSaver Bags.

How to Open the FoodSaver Bulk Storage or Square Canister

To open the FoodSaver Bulk Storage or Square Canister, turn the knob on the canister lid so the arrow points to “Open.” This will release the vacuum and you should be able to remove the lid.

NOTE: Do NOT attempt to vacuum seal any contents that are warmer than room temperature, since the vacuum may cause the contents to bubble out of the canister or jar.

16

17

Image 10
Contents Vac1050 Table of Contents WelcomeFoodSaver Vac StarFoodSaver Accessories How to Make a Custom-Made Bag with FoodSaver Rolls Place the items to be vacuum Open the lid. If the lid is lockedFirmly on the stars Packaged into the bag How to Use the Sealing Time Switch How to Use the Manual Seal ButtonAll the air is removed, press Will turn off when bag is sealedPlace the open end of the bag down into the vacuum channel Release the Manual Seal ButtonHose into the hole on the top How to Vacuum Package Using FoodSaver Designer CanistersCanister Insert the other end of the acces Sory hose into the hole on the topInsert the other end Accessory hose into the holeHose into the hose port on On the top of the jar sealerHow To Vacuum Package Using FoodSaver Universal Lids How to Vacuum Package Using FoodSaver Bottle Stoppers Top of the bottle stopperCare and Cleaning Instructions Food Preparation and Storage GuideDecay. Freezing will not Select top-quality young, tenderProduce that is free from mold Improve the qualityAsparagus Into the vacuum pump and helps guarantee a good seal Fudge to send as giftsLeave at least one inch of room Important Safeguards TroubleshootingAir Was Removed From the Bag, But Has Come Back Into the Bag Marinating Recipes VegetablesPork New Orleans Vacuum Packaging Non-Food Items Warranty and Service Information