T H E F O O D S AV E R U S E R M A N U A L
How to Use the Manual Seal Button
4Place the open end of the bag down into the vacuum channel.
IMPORTANT: Make sure the open end of the bag touches the blue label on the bottom of the vacuum channel.
5Close the lid.
6Lock the lid by pulling the locks forward on both sides until they snap into place. (You may need to press down lightly on the stars while pulling the locks forward.)
T H E F O O D S AV E R U S E R M A N U A L
7Press and release the On button.
The lights will turn on in sequence as the Vac 1050 vacuums the bag.
8 | To stop the vacuum process before |
| all the air is removed, press and |
| release the Manual Seal Button. |
| The sound will stop and the lights |
| will turn off when bag is sealed. |
| The locks on the sides will release |
| automatically. Lift up the lid and |
| remove the bag. |
9Vacuum packaging is complete.
NOTE: It takes approximately three seconds to stop the vacuum process and seal the bag. If you are using a small bag or pack- aging a fragile item, we recommend that you press down on the Manual Seal Button immediately after pressing the On button.
12 | 13 |