FoodSaver v825, V845 quick start FoodSaver Accessories, FoodSaver Accessory Guidelines

Page 3

QS.825_845_GSS_v3.1 4/30/04 3:47 PM Page 3

FoodSaver Accessories

Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.

FoodSaver Accessory Guidelines

1.Always leave at least one inch of space between contents and rim.

2.Wipe rim of canister, container or bottle to ensure it is clean and dry.

3.Place lid on canister or container, or place stopper in bottle.

4.For accessories with a large knob on lid, turn knob to Vacuum. Vacuum package using instructions below. When vacuum process is complete, turn knob to Closed before removing Accessory Hose.

5.For accessories without a large knob on lid, vacuum package using instructions below.

How to Vacuum Package with FoodSaver Accessories

Insert Accessory Hose

Set Seal Control Switch

Press and Release Lid

1.

Prepare container according to FoodSaver

5.

When motor turns off, vacuum process is complete.

 

Accessory Guidelines above.

 

6.

Gently twist and remove Accessory Hose from

2.

Insert one end of Accessory Hose (A) into

 

accessory and appliance.

 

Accessory Port (E) on appliance. Insert other

7.

To test vacuum, simply tug on accessory lid.

 

end into port on accessory. Twist gray tab while

 

It should not move.

 

inserting to ensure a tight fit.

 

Note: For important tips on using accessories

 

 

 

3.Turn Seal Control Switch (G) to Vacuum and Seal.

with different foods, please refer to the FoodSaver

4.To begin vacuum process, press down firmly on lid

until motor starts, wait 3-5 seconds, then release.

Reference Guide.

Accessories

 

 

 

Motor will continue to run.

 

 

How to Open FoodSaver Accessories after Vacuum Packaging

FoodSaver Vacuum Packaging Canisters

FoodSaver Jar Sealer with Mason Jars

 

(without large knob on lid)

For use with Ball® and Kerr ® brand Mason jars.

 

To release vacuum and open, push gray rubber

IMPORTANT: Do NOT use screw bands when

button on lid.

vacuum packaging jars. To open, wedge spoon

 

 

 

FoodSaver Bulk Canisters and Quick Marinators

between Mason jar lid and highest part of threaded

(with large knob on lid) and Universal Lids

rim. Twist spoon gently to release vacuum.

 

To release vacuum and open, turn knob on lid

 

 

to Open.

FoodSaver Bottle Stoppers

To release vacuum and open, twist and pull up on Bottle Stopper.

Image 3
Contents QuickStart Features of Your FoodSaver ApplianceGetting Started How to Make a Bag from a FoodSaver RollFoodSaver Accessories FoodSaver Accessory GuidelinesHow to Vacuum Package with FoodSaver Accessories Antibacterial Drip Tray Additional FeaturesCancel Button Extended Vacuum ButtonTips for Successful Vacuum Packaging Sealing a BagRemoving Air from a Bag General Tips