Yorkville Sound YS 1088 manual Master Section

Page 5

MICROMIX

Tip: Alternatively, this signal at this jack can be connected to the input of an exter- nal stereo effects unit and returned via channel 5/6 or 7/8 However, if you do not require any effects at all, the effects bus output signal can be connected to the input of an additional monitor system or another amp/speaker system via the EFX Out/Footswitch jack using a standard balanced patch cord. In this case, the EFX controls would act as send controls to achieve a semi-separate mix. Remember that the channel LEVEL controls also affect this signal.

6. Channel Pan and Bal Controls

The signal balance of each channel going to the left and right main PA channels can be adjusted by the Pan control in channels 1 to 4, and by the Bal control in channels 5/6 and 7/8. Turning this control counterclockwise towards the L will increase the signal level in the left channel to a maximum of 3 dB while also reducing the level in the right chan- nel to zero. Turning the control clockwise towards the R will increase the signal level in the right channel while also reducing the signal level in the left channel.

Master Section

1. MAIN Master Control

The MAIN master control adjusts the overall level of the main mix, the PA volume.

Note: To ensure maximum signal headroom and clarity, set the channel LEVEL controls first for a good signal without clipping, then set the master for the overall volume desired.

2. MON Master Control

The overall level of the monitor mix is adjusted with the MON master control.

Note: As with the MAIN master, set the MON master to deliver the desired volume after set- ting the channel sends.

3. MAIN EFFECTS Return Control

The MAIN EFX control regulates the amount of signal going from the output of the internal Digital Effects Processor to the MAIN mixing bus where it is mixed with the dry signals directly. It controls the intensity of the effects on the left and right MAIN output signals.

4. MON EFFECTS Return Control

The MON EFX control regulates the amount of signal going from the output of the internal Digital Effects Processor to the MON mixing bus where it is mixed with the dry signals directly from the channel MON send controls. It controls the overall effects intensity for the MON Out signal.

MON EFX Rtn

4 5 6

3 7

28

19

0 10

MAIN EFX Rtn

4 5 6

3 7

28

19

0 10

Post-EQ

MAIN OUT

Post-EQ

MON OUT

5. Post-EQ OUT

These jacks offer a variety of patching and routing options. They are positioned in the signal path after the M608 main graphic equalizers.

These bus signals are at line level, not speaker level (use the SPEAKER outputs on the rear panel to drive speakers). Using signals from these jacks has no effect on the operation of the M608's built-inpower amplifier. This makes it possible to feed an external power amplifier, or even multiple inter-connected power amps, while the inter- nal power amplifier is functioning.

Note: It is not necessary to have speakers connected if you’d like to use the unit strictly as a mixer. If a mono signal is required, possibly to feed a mono-house PA or another amp/speaker system, use the L/Mono Post-EQ jack. Mono operation of this jack is switched to left channel only as soon as a jack is inserted in the L Post-EQ jack. They follow the operation of the Main/Mon switch described below.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 608 Important Safety Instructions Introduction Stereo Power AmplifierInput Channels MIC and Line InputsChannel Lo, Mid, and Hi Equalization Channel Level Controls and Clip LEDsChannel MON Controls Channel EFX ControlsMaster Section EFX Out / Footswitch Jack Power AMP in JacksRec OUT Jacks MON Out JackDigital Effects Processor Effects Clip LED Built in 9-Band Graphic Equalizer & Shelving EQsGeneral Main Functions for the Graphic EQ and Shelving EqualizersM608 Rear Panel Power AmplifiersPower Switch and Breaker General Operating Instructions Input Wiring tips Canaux Pour Microphone & Niveau Ligne Canaux d’EntréesÉgalisation de Basse, Médianes et Aiguës de Canal Commandes Level de canal et DELs ClipCommande de Canal MON Section Maitresse Prises Rec OUT Prises Power AMPSortie Post-EQ DEL d’Alimentation et Commutateur de Mise En Marche Prise EFX Out / FootswitchAlimentation En Duplex Entrée Tape/CDUnité de Traitement Numérique Commandes Select et Modify EFX14. Sélecteur Amp Assign DEL Clip d’EffetGénéral Commutateur d’Alimentation et Disjoncteur Panneau Arrière du M608Amplificateurs de Puissance Instructions Générales d’Opération Conseil Pratique Pour le Raccordement aux Entrées Specifications Spécifications Block Diagram for M608 Two & Ten Year Warranty Canada

YS 1088 specifications

The Yorkville Sound YS 1088 is a powerful and versatile loudspeaker designed for both professional audio and home entertainment applications. Known for its exceptional sound quality and reliable performance, the YS 1088 has become a popular choice for musicians, DJs, and audio engineers alike.

At the heart of the YS 1088 is its advanced driver configuration, featuring an 8-inch woofer that delivers rich, deep bass response. This allows users to enjoy a full spectrum of sound, whether it is in a live performance setting or at a gathering with friends. The 1-inch titanium compression driver contributes to the speaker's clarity in the mid and high frequencies, ensuring that vocals and intricate sound details are reproduced faithfully.

One of the standout features of the YS 1088 is its unique enclosure design, which enhances both durability and acoustic performance. Built from high-quality plywood, the cabinet is designed to withstand the rigors of transport and use in diverse environments. Additionally, the curved front baffle minimizes unwanted resonances, resulting in a cleaner, more defined sound.

The YS 1088 incorporates advanced technologies that set it apart from other loudspeakers in its class. It utilizes a high-efficiency passive crossover network, which effectively divides the audio signal into the appropriate frequency ranges for each driver. This not only optimizes performance but also protects the components from damage due to overexertion.

Another noteworthy characteristic of the YS 1088 is its versatility in terms of connectivity. The speaker is equipped with standard 1/4-inch and Speakon connectors, making it easy to integrate into various sound systems. Additionally, with a power handling capacity of 400 watts RMS, the YS 1088 can easily deliver powerful sound in large venues without distortion.

Portability is also a key aspect of the YS 1088, as it features convenient handles for easy transport and setup. Weighing in at a manageable 30 pounds, users will appreciate its ease of handling during gigs or events.

In summary, the Yorkville Sound YS 1088 stands out in the crowded marketplace of loudspeakers thanks to its superior sound quality, rugged design, and advanced technologies. Whether you are a professional looking for reliable performance or an enthusiast in need of a powerful speaker for home use, the YS 1088 proves to be an excellent investment that delivers impressive sound across a range of applications.
Top Page Image Contents