Bulldog Plus Monitor Operations
The Main Screen has 7 areas that present information on the operating status of your UPS. These areas are discussed in the following sections.
Host Selection: Press the combo box to select hosts that runs Bulldog Plus in the LAN. Users can monitor or control the UPS remotely (password is needed).
Connection Indication: The logo will rotate while the communication between Bulldog Monitor and Bulldog Service is established.
Information Display: Press Bottom Layer Buttons to change the information that is displayed in this area.
Recent Event Log: Preserve last 10 event logs in the combo box, click on the combo box to pull down and view the logs.
Top Layer Buttons
These buttons are used to increase the speed of your operation, refer to the dialog boxes in the menu.
Configuration: Same as the
Meters: Same as the
Belkin Components | 14 |