Bayou Classic DB250, DB375 owner manual Lighting Instructions, Before Lighting

LIGHTING INSTRUCTIONS

WARNING FOR YOUR SAFETY:

DO NOT stand with head, body or arms over the cooker when lighting. Loose clothing and hair can catch fire during lighting and operation.

Follow these instructions exactly. Read and follow all warnings and instructions in this manual before using your cooker.

1. Make sure both brass valves and cylinder valve are in the OFF position.

2. Turn ON the fuel supply by S-L-O-W-L-Y rotating the cylinder valve counter-clockwise one full turn. HINT: Turning the cylinder valve quickly causes a sudden rush of gas that sometimes activates the Gas Flow Limiting Device. To prevent this, always rotate cylinder valve S-L-O-W-L-Y.

3. Place fire place match or long lighter over the burner, then S-L-O-W-L-Y turn one brass valve counter-clockwise until you hear gas HISSING to the burner. Then light the burner, keeping hands and face away from the top of the cooker.

4. Adjust air control shutter on burner for a blue flame. In direct sunlight, flame may appear clear.

5. Adjust the brass valve for desired flame height.

6. Repeat instructions 3-5 to light second burner. After lighting, rotate cylinder valve to full open.

BEFORE LIGHTING						Make sure Regulator is OFF
Make sure LP Cylinder is OFF
								at both valves
1
					E
					S
O				W	I
			K
F
	F	C
		- CLO							E
						O		IS
						F
						F		KW
							-
								CLOC

S-L-O-W-L-Y Turn

LP Cylinder Valve One Full Turn

2

				I	Gas will flow
			E
				S
N				W	to and stop
				K
O				C
C			LO		at closed regulator
		-
-	R
O
	U NTE	C

LIGHTING	S-L-O-W-L-Y	ADJUST Air Control Shutter
Place lit Match over Burner	Turn Brass Valve ON
		4	for Blue Flame
3

		O
		N
		-			E
	Position hand	C			S
		O			I
LIGHT	below burner	U	ER-CL	K	W
		N
		T	O
				C

BURNER

HERE!

		ADJUST Brass Valve
5		for Flame Height
O
N
-				E
C				S
O				I
U			K	W
N
T		C
	ER-CL
		O

NOTE: The brass valves on regulator hose assembly control flame intensity only. They are not an ON/OFF valves.

After lighting Burners, OPEN
6 LP Cylinder Valve FULLY						DO NOT light burner
						at air intake
					Y
					L
P				U	L
O
E			F
	N	E
		VALV

16