4. | Rotate the shower head back to its proper position over the brew |
| basket. Close the water reservoir lid. |
5. | Fill pitcher to 3 quart level with ice. |
6. | Place the pitcher lid on the pitcher. Slide the pitcher towards the iced |
| tea maker with the pitcher spout fitting just under the Adjustable Tea |
| Steeping Control. |
7. | Plug the power cord into an electrical outlet and push the “on” button. |
8. | When the cycle is complete, your iced tea maker will shut off |
| automatically. |
9. | Slide the pitcher away from the iced tea maker and discard the water |
Water Filtration System
(Water filtration is not supplied with this unit, but it may be ordered separately by visiting our website or calling
This
First look for the MR. COFFEE® Filtration Friendly symbol 
on the bottom of your filter basket. If you do not see this symbol, please call
To use the water filtration system in your MR. COFFEE® Iced Tea Maker, please follow these steps:
in the pitcher. |
1. Using the red indicator on the frame
Red Indicator
NOTE: Plugging the iced tea maker into an electrical outlet may trigger the brewing cycle since the “on” button may have inadvertently 
been pushed. Also, if you wish to turn the iced tea maker off during the brewing cycle, just grasp the molded plug and unplug
the power cord.
Your iced tea maker is now ready to use. Enjoy it!
water filter, align the indicator to the letter on the frame that corresponds with the month that you are using the disk for the first time. This serves to remind you to change the disk every month (approx. 30 brewing cycles).
2. Place the MR.COFFEE® paper filter in the filter basket. Place tea in the paper filter.
3. Place the MR. COFFEE® water filter in the filter basket, making sure that the side marked “this side up” faces you and that the water filter is level.
4. Close the filter basket lid. You are now ready to brew a great tasting tea.
5. When you are done brewing your tea, rinse the water filter with fresh water. Do not put your water filter in the dishwasher.
To replace the water filter disks: twist the gray disk cover from your water filtration system. Remove the used disk. Insert the new disk into the frame and twist the cover back into place.
Frame
Filter Disk
Disk Cover
6 | 7 |