Mr. Coffee TC81/BLACK, CBTC80/WHITE Setting the Clock, PRE-SET the Brewing Time

PM	HOUR MIN AUTO SELECT
	AUTO
	ON

					RED	GREEN
	HOUR	MINUTE	AUTO	SELECT	“ON”	“AUTO”
CLOCK	SET	SET	SET	SET	LIGHT	LIGHT

SETTING THE CLOCK AND TIMER (Clock Models Only)

NOTE: You do not have to set your clock before the Coffeemaker will operate. It is necessary to plug in the power cord. Press the select button and the red “ON” light will activate.

SETTING THE CLOCK

1.Plug the power cord into your electrical outlet. The clock display will flash until you set the time.

2.Alternately press and hold the HOUR and MINUTE buttons until you reach the current time. The PM indicator in the display will illuminate to indicate PM.

PRE-SET THE BREWING TIME

Press and hold the AUTO button while setting the desired brew time with the HOUR and MINUTE buttons. The word BREW will illuminate along with AM/PM indicator light

to indicate brew start time.

AUTOMATICALLY BREW AT THE PRE-SET TIME

1.Follow steps 1 through 5 in “BREWING COFFEE” on Page 5.

2.Push the select button until the word AUTO appears in the display.

3.Brewing will begin at the time you have preset, and the coffee will remain hot and fresh for 4 hours.

IM P O R TA N T

TO RESET AUTO BREW AT PRE-SET TIME

The programmable timer will NOT automatically brew the next day if left in the AUTO position after its last use. This is a safety feature. In order to brew coffee automatically the next day, reset AUTO BREW by pushing the select button until the word AUTO appears in the display.

8