Receiving
1.Receiving
1.Remove the packing material from the top of the conveyor stack.
2.Remove all packing material and tape securing components within the machine. Check that both trays are positioned properly.
3.Check for the following component parts:
A.Check that the deflector screen is secure in the rinse drain.
B.Check the position of the
C.Check that the conveyor is level and the drive gear is engaged in the conveyor’s outer rim grooves.
D.Check that overflow drain tube is in position in detergent tank.
E.Check that the detergent tank screen in the detergent tank is in position.
F.Check that the drain screen is in position.
4.Important: Read and follow up instructions completely.
MODEL | Page 2 |