10 | NOTE - Legs not shown for clarity | IMPORTANT: | ||||
|
|
| Bend tabs of insulation bowl straight down toward | |||
|
|
| grease cup to avoid grease spillage. | |||
|
|
| ||||
|
|
|
|
|
|
|
Clip grease cup bracket onto bar at notches
Final Assembly
11 | Element | Raised Lip | |
Bracket | |||
| |||
|
|
Remove protective film from controller prior to use.
Raised lip of controller should be inserted until it is snug against element bracket
Η
Top View
Ensure that controller knob is fully rotated counterclockwise to the OFF position prior to plugging controller into grill and outlet.
Congratulations, you have now completed the assembly of your grill. You can now look forward to hours of enjoyable cooking. For your safety and optimum grill performance finish reading the instructions on the following pages before using your new grill.
NOTE:
You may have hardware left over after completing assembly of your grill. This is normal as in some cases we have included extra hardware to ensure that you have enough.
4654870 • 11