B4 Three-Conductor Branch Circuit Connection

Installation Instructions

Electrial Connections cont.

NEW CONSTRUCTION AND FOUR-CONDUCTOR BRANCH CIRCUIT CONNECTION

B3	• When installing in a new construction,
	or

•When installing oven in a mobile home, or

•When local codes do not permit grounding through neutral:

a.Cut the neutral (White) lead from the crimp. Re-strip the neutral (white) lead to expose the proper length of conductor.

B4 Three-Conductor Branch

Circuit Connection

When connecting to a 3-conductor branch circuit, if local codes permit:

a.Connect the bare oven ground conductor with the crimped neutral (white) lead to the branch circuit neutral (white or gray in color), using wire nut.

Ground

Wires

Junction

Box Cover

b.Attach the appliance grounding lead (green or bare copper) in accordance with local codes. If the residence grounding conductor is aluminum, see WARNING note.

c. Connect the oven neutral (white) lead to the branch circuit neutral (white or gray) in accordance with local codes, using wire nut.

d.Connect the oven red lead to the branch circuit red lead and the oven black lead to the branch circuit black lead in accordance with local codes, using wire nuts. If the residence red, black or white leads are aluminum conductors, see “ WARNING” note on preceeding page.

e. Install Junction Box Cover.

Ground

Wires

Ground and neutral wires

Junction

Box Cover

b.Connect the oven red lead to the branch circuit red lead, using wire nut.

c. Connect the oven black lead to the branch circuit black lead in accordance with local codes, using wire nut. If the residence red, black or white leads are aluminum conductors, see “ WARNING” note on preceeding page.

d.Install Junction Box Cover.