➢Battery Replacement
Slide the door up to expose the battery beneath the holder. Remove the expired battery. Place the new battery into the remote control. When power is returned the remote control is ready for use.
➢Multi-car control capability
You can operate the
To change the Car to be operated:
Two Way Remote
1.Press/hold the 
button for 3 seconds or until the remote beeps.
The 
or 
icon flashes and the text “Car 1” or “Car 2” is displayed.
2.Change car: While in this mode press the 
button to switch
between cars and the 
or 
icon changes accordingly indicating which car the remote currently operates.
3.Select the car you want to operate and then press any command to operate the system. The selected car remains selected until the setting is changed.
One Way Remote
1.Press and hold the 
button until the amber light blinks once or twice indicating current vehicle (one blink = car 1, two blinks = car 2).
2.To change from one car to the other press the 
button again.
3.When using the remote to control the system, the amber light will flash in a sequence of 1 or 2 flashes indicating the current vehicle selected.
© 2008 Directed Electronics. All rights reserved. | 13 |