Hatco FDW-1-MN, FST-1-MN manual Installation, Set-Up

Page 6

INSTALLATION

SET-UP

The Macho Nacho™ unit comes pre-assembled and ready for set-up.

1.Remove tape and protective film from all surfaces of unit.

2.Install the chip deflector inside, behind the upper door. See Figure 5.

3.Install decals on the upper front and side stainless steel panels.

Before installing decals, clean the stainless steel side panels with a non-oily cleaner, such as isopropyl alcohol (rubbing alcohol). After the cleaned surfaces have dried, simply remove the protective backing from the decal and apply to the panel. Any air pockets or bubbles behind the decal can be removed by rubbing gently with a soft cloth, working from the center of the decal towards the outer edges.

WARNING

For safe and proper operation, the unit must be located at a reasonable distance from combustible walls and materials. If safe distances are not maintained, discoloration or combustion could occur.

CAUTION

To prevent injury or damage the unit must be transported in the upright position. If laid on its side, all glass surfaces must be secured with tape.

CAUTION

Locate the unit at the proper counter height,

in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and strong enough

to support the weight of the unit and food displayed.

CAUTION

Unit is not weatherproof. For safe and proper operation locate the unit indoors where the ambient air temperature is a minimum of 70°F (21°C).

Install chip deflector in slots located behind upper door panel.

Chip Deflector

 

Decal-Install on

 

upper stainless

Floor Panels

steel panel.

 

Figure 5. Set-Up (FDW-1-MN shown)

Form No. MNM-0702

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Macho Nacho Contents Important Owner InformationIntroduction Important Safety Instructions FDW-1-MN Model Model DescriptionALL Models FST-1-MN ModelSpecifications Plug ConfigurationsInstallation SET-UPControl Panel FDW-1-MN Temperature Gauge OperationDisplay Light Bulb Replacement MaintenanceCleaning GeneralHatco Limited Warranty Product WarrantyForm No. MNM-0702 Form No. MNM-0702 Hatco Authorized Parts Distributors

FST-1-MN, FDW-1-MN specifications

The Hatco FDW-1-MN and FST-1-MN are innovative units designed to enhance food safety and ensure optimal serving temperatures in commercial kitchens. These two models are integral components of Hatco’s expansive line of food warming and holding equipment, catering directly to the demands of the foodservice industry.

The FDW-1-MN is a standalone food warmer that excels in maintaining the ideal temperature for a variety of dishes. It features a robust design that promotes ease of use while maintaining safety and efficiency. The unit is constructed from durable stainless steel, ensuring longevity and resistance to corrosion. Its compact design allows it to fit seamlessly into various kitchen layouts, making it a versatile choice for restaurants, cafes, and catering services.

A key technology integrated into the FDW-1-MN is its adjustable temperature control. This feature allows chefs to set the perfect temperature tailored for the specific food items being served, ensuring that everything from soups to pastas is served at the right heat without compromising quality. Additionally, the unit employs a high-efficiency heating element which provides consistent and even heating throughout, preventing cold spots that could affect food safety standards.

On the other hand, the FST-1-MN is designed with functionality in mind. This model serves as a countertop food warmer, offering a sleek, space-saving solution for busy kitchen environments. The unit comes equipped with a temperature indicator light that alerts users when the heater is in operation, further enhancing safety by preventing unintended contact with hot surfaces.

Both models prioritize energy efficiency by utilizing advanced heating technologies that ensure quick warm-up times and reduce electric consumption. This not only lowers operational costs but also minimizes environmental impact, aligning with modern sustainability goals in foodservice operations.

In terms of safety features, the FDW-1-MN and FST-1-MN incorporate built-in overheating protection and are designed to meet stringent health and safety regulations, making them reliable options for any establishment. Their easy-to-clean surfaces further simplify maintenance, allowing staff to keep them in pristine condition with minimal effort.

In conclusion, the Hatco FDW-1-MN and FST-1-MN stand out in the crowded commercial kitchen landscape for their combination of durability, safety, and smart technology. These units are engineered to meet the rigorous demands of foodservice operations, ensuring that restaurants can deliver hot, safe, and high-quality meals to their customers consistently.
Top Page Image Contents