Exabyte EXB-8500 General, Physical Characteristics, Environmental, Sustained Data Transfer Rate

Page 45

Appendix B Tape Drive Specifications

General

Front panel Unload button, LED indicators for

SCSI activity, tape motion,and errors

Back panel SCSI cable connector, power connector, jumper block and DIP switch for SCSI ID, SCSI terminator R-packs (single-ended configuration)

Interface SCSI-1 and SCSI-2, single-ended or differential

Physical Characteristics

Form factor 5.25-inch full-high

Size 82.5 mm (3.25 inches) high 146.0 mm (5.75 inches) wide 203.2 mm (8.00 inches) deep

Weight 1.2 kilograms (2.6 pounds)

Environmental

Operating temperature

+5°C to +40°C (+41°F to +104°F)

Non-operating temperature

–40°C to +60°C (–40°F to +140°F)

Operating rel. humidity

20% to 80%

Non-operating rel. humidity

10% to 90%

Sustained Data Transfer Rate

8200 format 262.5 KBytes/sec

8200ca format (EXB-8500c) 500 KBytes/sec

8500 format 500 KBytes/sec

8500ca format (EXB-8500c) 1 MByte/sec

Capacity of EXATAPE 112m Data Cartridge

8200 format 2.5 GBytes

8200ca format (EXB-8500c) 5.0 GBytes

8500 format 5.0 GBytes

8500ca format (EXB-8500c) 10.0 GBytes

Power and Reliability

 

Supply voltages

Standard +5 VDC and +12 VDC ±5%

 

 

Tolerance

125 mVpp max.b

 

 

Maximum current

2.09 Amps at +5 VDC;

 

 

 

0.75 Amps at +12 VDC

 

 

Maximum power

10.45 watts at +5 VDC;

 

 

consumption

9.1 watts at +12 VDC

 

 

Mean time between failure

40,000 hours @ 10% duty cycle

 

 

 

 

 

aAssuming an average compression ratio of 2:1.

bThe ripple voltage is included in the total voltage tolerance.

December 1993

EXB-8500/EXB-8500c

45

Image 45
Contents Qvwdoodwlrqdqg 2SHUDWLRQ Disclaimer CopyrightTrademark Notices Revision HistoryAgency Standards FCC NoticeCDC Notice Product Warranty Caution Contents EXB-8500/EXB-8500c 306261 Welcome For More Information Conventions Used in This GuideInstalling the Tape Drive Ensuring ESD Protection Unpacking the Tape DriveSetting the Scsi ID Setting the Scsi ID with the DIP Switches DIP switch settings for the tape drives’s Scsi Setting the Scsi ID with JumpersPreparing the Tape Drive for the Scsi Bus Setting the Scsi ID with a Remote SwitchTerminating a Single-Ended Tape Drive Optional External TerminationRemoving the R-Packs Connecting the Scsi Cable Terminating a Differential Tape DriveReplacing the R-Packs Location of Scsi connector Installing the Tape Drive in a PC Drive BayMounting Procedure December EXB-8500/EXB-8500c Tape Drive Stored for Less Than Six Months Performing the Initial Power OnTape Drive Stored for Six Months or More EXB-8500/EXB-8500c 306261 Reading the LEDs Operating the Tape DriveTape drive states indicated by the LEDs Choosing High-Quality Data Cartridges Selecting Data CartridgesSetting the Write-Protect Switch Loading a Data Cartridge Unloading a Data CartridgeUnload Button Error During Unload Procedure Determining When to Clean the Tape Drive Preventive MaintenanceUsing the 8mm Cleaning Cartridge Caring for Data Cartridges Page Replacing Data Cartridges EXB-8500/EXB-8500c 306261 Packing the Tape Drive Single-pack shipping carton Figure Packing the Tape Drive for ShipmentFour-pack shipping carton Environmental Requirements for Shipment Environmental specifications for shipping the tape driveGeneral Requirements Scsi Cable RequirementsCable Length Requirements for Differential Configurations Scsi Cable ConnectorCable Length Requirements for Single-Ended Configurations Attaching the Tape Drive to a FrameDecember EXB-8500/EXB-8500c Mounting holes on the sides of the tape drive Chassis Grounding optionalPower Cable Connector EXB-8500/EXB-8500c 306261 Power and Reliability Physical CharacteristicsGeneral EnvironmentalEXB-8500/EXB-8500c 306261 Index Exabyte Corporation 1685 38th Street Boulder, Colorado USA

EXB-8500, EXB-8500c 8mm specifications

The Exabyte EXB-8500c is a prominent member of the Exabyte tape drive family, well-regarded for its reliability and high data storage capacity. Introduced in the mid-1990s, this 8mm tape drive is designed for applications needing efficient data backup and archival solutions. With its impressive technology and features, the EXB-8500c has become a staple in many businesses and organizations looking for dependable data management tools.

One of the key characteristics of the EXB-8500c is its ability to store a significant amount of data. The drive can accommodate up to 20 GB of uncompressed data per tape, and with compression technologies, this can increase up to 40 GB, making it ideal for large data storage needs. This makes the EXB-8500c perfect for critical data storage and backup operations.

The EXB-8500 is built on advanced technology allowing it to achieve high transfer rates of up to 6 MB/s when using high-capacity 8mm tapes. This performance is crucial for businesses that require fast data retrieval and backup to ensure minimal downtime during critical operations. The robust design of the EXB-8500c contributes to its durability; it can withstand the demanding environments of data centers and corporate instances, proving its reliability over time.

Another key feature of the EXB-8500c is its compatibility with various operating systems, including UNIX, Windows, and NetWare, expanding its usability across a range of platforms. The drive’s compatibility allows organizations to integrate it into existing systems without significant changes or operations downtime.

Additionally, the EXB-8500c utilizes a scripted command set for error correction, ensuring data integrity during the writing and reading processes. This technology reduces the chances of data loss or corruption, which is a critical consideration for businesses handling sensitive information.

The EXB-8500c is also designed for ease of use with features such as automatic tape loading and unloading capabilities, facilitating faster data backups and restores. Its user-friendly interface allows operators to manage and monitor tape usage effortlessly, making it an excellent choice even for those with limited technical expertise.

In conclusion, the Exabyte EXB-8500c 8mm tape drive stands out with its high storage capacity, impressive data transfer rates, compatibility across platforms, and advanced error correction technologies. These features have solidified its place in the data storage marketplace, making it a trusted solution for organizations looking to safeguard their valuable information.