Exabyte EXB-8500c 8mm manual Power Cable Connector

Page 43

Note: The power supply returns are connected to the chassis, so you cannot isolate logic common ground from chassis ground.

Power Cable Connector

The tape drive operates from standard +5 VDC and +12 VDC supply voltages; it cannot use external AC power. Safety agency certification requires that the supplied voltage be from a Safety Extra-Low Voltage source (per IEC 950). Refer to Appendix B for tape drive power specifications.

CAUTION

The tape drive does not provide any overvoltage or over current protection. For this reason, be certain that the power is off before connecting the tape drive to a power supply.

The power connector used in the tape drive is compatible with power connectors used for standard 5.25-inch devices. To connect the tape drive to a power cable, use an AMP 1-480424-0 series or equivalent female connector. For information about the specific power connector pin assignments, refer to the EXB-8500 and EXB-8500c Product Specification.

December 1993

EXB-8500/EXB-8500c

Image 43

Contents Qvwdoodwlrqdqg 2SHUDWLRQ Revision History CopyrightDisclaimer Trademark NoticesFCC Notice Agency StandardsCDC Notice Product Warranty Caution Contents EXB-8500/EXB-8500c 306261 Welcome For More Information Conventions Used in This GuideInstalling the Tape Drive Ensuring ESD Protection Unpacking the Tape DriveSetting the Scsi ID Setting the Scsi ID with the DIP Switches DIP switch settings for the tape drives’s Scsi Setting the Scsi ID with JumpersPreparing the Tape Drive for the Scsi Bus Setting the Scsi ID with a Remote SwitchOptional External Termination Terminating a Single-Ended Tape DriveRemoving the R-Packs Terminating a Differential Tape Drive Connecting the Scsi CableReplacing the R-Packs Location of Scsi connector Installing the Tape Drive in a PC Drive BayMounting Procedure December EXB-8500/EXB-8500c Tape Drive Stored for Less Than Six Months Performing the Initial Power OnTape Drive Stored for Six Months or More EXB-8500/EXB-8500c 306261 Reading the LEDs Operating the Tape DriveTape drive states indicated by the LEDs Choosing High-Quality Data Cartridges Selecting Data CartridgesSetting the Write-Protect Switch Unloading a Data Cartridge Loading a Data CartridgeUnload Button Error During Unload Procedure Determining When to Clean the Tape Drive Preventive MaintenanceUsing the 8mm Cleaning Cartridge Caring for Data Cartridges Page Replacing Data Cartridges EXB-8500/EXB-8500c 306261 Packing the Tape Drive Single-pack shipping carton Figure Packing the Tape Drive for ShipmentFour-pack shipping carton Environmental Requirements for Shipment Environmental specifications for shipping the tape driveGeneral Requirements Scsi Cable RequirementsAttaching the Tape Drive to a Frame Scsi Cable ConnectorCable Length Requirements for Differential Configurations Cable Length Requirements for Single-Ended ConfigurationsDecember EXB-8500/EXB-8500c Mounting holes on the sides of the tape drive Chassis Grounding optionalPower Cable Connector EXB-8500/EXB-8500c 306261 Environmental Physical CharacteristicsPower and Reliability GeneralEXB-8500/EXB-8500c 306261 Index Exabyte Corporation 1685 38th Street Boulder, Colorado USA

EXB-8500, EXB-8500c 8mm specifications

The Exabyte EXB-8500c is a prominent member of the Exabyte tape drive family, well-regarded for its reliability and high data storage capacity. Introduced in the mid-1990s, this 8mm tape drive is designed for applications needing efficient data backup and archival solutions. With its impressive technology and features, the EXB-8500c has become a staple in many businesses and organizations looking for dependable data management tools.

One of the key characteristics of the EXB-8500c is its ability to store a significant amount of data. The drive can accommodate up to 20 GB of uncompressed data per tape, and with compression technologies, this can increase up to 40 GB, making it ideal for large data storage needs. This makes the EXB-8500c perfect for critical data storage and backup operations.

The EXB-8500 is built on advanced technology allowing it to achieve high transfer rates of up to 6 MB/s when using high-capacity 8mm tapes. This performance is crucial for businesses that require fast data retrieval and backup to ensure minimal downtime during critical operations. The robust design of the EXB-8500c contributes to its durability; it can withstand the demanding environments of data centers and corporate instances, proving its reliability over time.

Another key feature of the EXB-8500c is its compatibility with various operating systems, including UNIX, Windows, and NetWare, expanding its usability across a range of platforms. The drive’s compatibility allows organizations to integrate it into existing systems without significant changes or operations downtime.

Additionally, the EXB-8500c utilizes a scripted command set for error correction, ensuring data integrity during the writing and reading processes. This technology reduces the chances of data loss or corruption, which is a critical consideration for businesses handling sensitive information.

The EXB-8500c is also designed for ease of use with features such as automatic tape loading and unloading capabilities, facilitating faster data backups and restores. Its user-friendly interface allows operators to manage and monitor tape usage effortlessly, making it an excellent choice even for those with limited technical expertise.

In conclusion, the Exabyte EXB-8500c 8mm tape drive stands out with its high storage capacity, impressive data transfer rates, compatibility across platforms, and advanced error correction technologies. These features have solidified its place in the data storage marketplace, making it a trusted solution for organizations looking to safeguard their valuable information.