Exabyte EXB-8500c 8mm manual Tape Drive Stored for Six Months or More

Page 21

When power is applied, the tape drive performs its power-on initialization and self-test (POST). Assuming that no data cartridge is loaded and that the tape drive is connected correctly, POST takes about 65 seconds, as follows:

During the first part of POST, both the amber and green LEDs are lit.

During the second part of POST, various combinations of the LEDs may be lit, depending on whether the tape drive is connected to the SCSI bus and whether a data cartridge is loaded.

After the power-on initialization and self-test have completed, both LEDs will be turned off if there is no data cartridge loaded. If a data cartridge is loaded, the green LED will remain on.

Important

If the amber LED does not go out after the power-on initialization and self-test are complete, an error has occurred. Contact your vendor.

When POST completes, the tape drive is ready for normal operation.

Tape Drive Stored for Six Months or More

If the tape drive has been stored for six months or more, perform the following steps using your backup software to ensure that the tape drive’s internal lubrication is properly distributed:

1.Apply power to the tape drive. The tape drive performs its POST as on page 20.

2.Locate a data cartridge that does not contain any valuable information. Set the write-protect switch to write enabled (see page 26).

3.Press the unload button on the front of the tape drive. Insert the data cartridge with the label side up and the write-protect switch facing you.

December 1993

EXB-8500/EXB-8500c

21

Image 21
Contents Qvwdoodwlrqdqg 2SHUDWLRQ Disclaimer CopyrightTrademark Notices Revision HistoryAgency Standards FCC NoticeCDC Notice Product Warranty Caution Contents EXB-8500/EXB-8500c 306261 Welcome For More Information Conventions Used in This GuideInstalling the Tape Drive Ensuring ESD Protection Unpacking the Tape DriveSetting the Scsi ID Setting the Scsi ID with the DIP Switches DIP switch settings for the tape drives’s Scsi Setting the Scsi ID with JumpersPreparing the Tape Drive for the Scsi Bus Setting the Scsi ID with a Remote SwitchTerminating a Single-Ended Tape Drive Optional External TerminationRemoving the R-Packs Connecting the Scsi Cable Terminating a Differential Tape DriveReplacing the R-Packs Location of Scsi connector Installing the Tape Drive in a PC Drive BayMounting Procedure December EXB-8500/EXB-8500c Tape Drive Stored for Less Than Six Months Performing the Initial Power OnTape Drive Stored for Six Months or More EXB-8500/EXB-8500c 306261 Reading the LEDs Operating the Tape DriveTape drive states indicated by the LEDs Choosing High-Quality Data Cartridges Selecting Data CartridgesSetting the Write-Protect Switch Loading a Data Cartridge Unloading a Data CartridgeUnload Button Error During Unload Procedure Determining When to Clean the Tape Drive Preventive MaintenanceUsing the 8mm Cleaning Cartridge Caring for Data Cartridges Page Replacing Data Cartridges EXB-8500/EXB-8500c 306261 Packing the Tape Drive Single-pack shipping carton Figure Packing the Tape Drive for ShipmentFour-pack shipping carton Environmental Requirements for Shipment Environmental specifications for shipping the tape driveGeneral Requirements Scsi Cable RequirementsCable Length Requirements for Differential Configurations Scsi Cable ConnectorCable Length Requirements for Single-Ended Configurations Attaching the Tape Drive to a FrameDecember EXB-8500/EXB-8500c Mounting holes on the sides of the tape drive Chassis Grounding optionalPower Cable Connector EXB-8500/EXB-8500c 306261 Power and Reliability Physical CharacteristicsGeneral EnvironmentalEXB-8500/EXB-8500c 306261 Index Exabyte Corporation 1685 38th Street Boulder, Colorado USA

EXB-8500, EXB-8500c 8mm specifications

The Exabyte EXB-8500c is a prominent member of the Exabyte tape drive family, well-regarded for its reliability and high data storage capacity. Introduced in the mid-1990s, this 8mm tape drive is designed for applications needing efficient data backup and archival solutions. With its impressive technology and features, the EXB-8500c has become a staple in many businesses and organizations looking for dependable data management tools.

One of the key characteristics of the EXB-8500c is its ability to store a significant amount of data. The drive can accommodate up to 20 GB of uncompressed data per tape, and with compression technologies, this can increase up to 40 GB, making it ideal for large data storage needs. This makes the EXB-8500c perfect for critical data storage and backup operations.

The EXB-8500 is built on advanced technology allowing it to achieve high transfer rates of up to 6 MB/s when using high-capacity 8mm tapes. This performance is crucial for businesses that require fast data retrieval and backup to ensure minimal downtime during critical operations. The robust design of the EXB-8500c contributes to its durability; it can withstand the demanding environments of data centers and corporate instances, proving its reliability over time.

Another key feature of the EXB-8500c is its compatibility with various operating systems, including UNIX, Windows, and NetWare, expanding its usability across a range of platforms. The drive’s compatibility allows organizations to integrate it into existing systems without significant changes or operations downtime.

Additionally, the EXB-8500c utilizes a scripted command set for error correction, ensuring data integrity during the writing and reading processes. This technology reduces the chances of data loss or corruption, which is a critical consideration for businesses handling sensitive information.

The EXB-8500c is also designed for ease of use with features such as automatic tape loading and unloading capabilities, facilitating faster data backups and restores. Its user-friendly interface allows operators to manage and monitor tape usage effortlessly, making it an excellent choice even for those with limited technical expertise.

In conclusion, the Exabyte EXB-8500c 8mm tape drive stands out with its high storage capacity, impressive data transfer rates, compatibility across platforms, and advanced error correction technologies. These features have solidified its place in the data storage marketplace, making it a trusted solution for organizations looking to safeguard their valuable information.