Jura Capresso IMPRESSA E65 manual Drawing off steam, Return to stand-by, Drawing off hot water

If the draw-off key is pressed by mistake, the selection

can be cancelled by pressing the draw-off key. Your machine rinses.

After drawing off powder coffee, we recommend that you regularly clean the filler funnel with a clean bottle-cleaning brush.

8. Drawing off steam

The steam can be used for heating liquids and also for frothing milk for cappuccino. Make sure that the frothing aid (14) is pushed upwards when heating liquids. When frothing liquids, push the frothing aid downwards (Fig. 5).

Place a cup under the pivoting nozzle for hot water/steam (13).

Immerse the frothing aid (14) into the milk to be frothed or the liquid to be heated and turn the selector switch for hot water/steam (12) to the position.

Immediately after this, press the maintenance key (4).

When you have reached the required quantity of steam, turn the selector switch for hot water/steam (12) back to the position .

The , symbols light up.

If you would like to draw off a coffee immediately after the steam, please proceed as described in point 8.1.

The max. draw-off time is about 8 minutes.

A little water will come out first when frothing. It can be let off before actually drawing off steam. The good result, e.g. when frothing milk, is not influenced in any way.

At the start of a steam draw-off, there can be splashes. The pivoting nozzle for hot water/steam gets hot. Please avoid direct contact with the skin.

8.1 Return to stand-by

Place a vessel under the pivoting nozzle for hot water/steam (13).

Press a draw-off key, the symbol lights up on the display.

Turn the selector switch for hot water/steam (12) to the position

.

Draw water off until the flow of water is automatically inter- rupted and the symbol lights up.

After this, turn the selector switch for hot water/steam (12) back to the position.

After each steam draw-off, clean the pivoting nozzle with a damp cloth.

9. Drawing off hot water

 Place a cup under the pivoting nozzle for hot water/steam (13)	E
and turn the selector switch for hot water/steam (12) to the

symbol .

The machine now produces hot water.

To finish the process, turn the selector switch for hot water/ steam (12) back to the position.

At the start of a water draw-off, there can be splashes. The pivoting nozzle for hot water/steam gets hot. Please avoid direct contact with the skin.

10. Switching machine off

When the machine is switched off, the rinsing programme is auto- matically started. Therefore, place an empty container under the coffee-spout and press the ON/OFF switch.

When the rinsing water has run into the cup, the machine switches off. Throw the rinsing water away.

11