Jura Capresso IMPRESSA E60, IMPRESSA E40 manual Rinsing the machine, Adjusting the water quantity

Page 10

5. Rinsing the machine

When the symbol lights up, a rinsing process is demanded.

Place an empty cup under the coffee-spout.

Press the rinsing maintenance key (4). The rinsing process is automatically ended.

If the machine has been switched off and has already cooled down, the rinsing function will be demanded when the machine is switched on.

A rinsing is automatically started when the machine is switched off.

6. Adjusting the water quantity

The water quantity can be infinitely adjusted with rotary knob (1). The small key means little water for espresso, the large cup means a lot of water for coffee.

You can also change the water volume while coffee is being drawn off. Simply turn the rotary knob (1) to give more or less water.

With draw-off key , the machine automatically doubles the water quantity and distributes it to 2 cups.

7. Drawing off espresso/normal coffee

As soon as the symbol lights up, you can draw off coffee.

Place 1 or 2 cups, as necessary, under coffee-spout (9) and press the required draw-off key. The pre-brew system (I.P.B.A.S.©) moistens the coffee powder, briefly interrupts the flow and then starts the actual brewing process.

You can interrupt the draw-off prematurely by pressing any of the coffee draw-off keys.

In order to obtain outstanding froth, you can adapt the coffee-spout (5) individually to the size of your cups (Fig. 3).

7.1 Drawing off espresso/strong coffee

Place 1 cup under the coffee-spout (9).

Press the draw-off symbol until two dots light up to the left

of the symbol.

This draw-off of espresso / strong coffee is only possible for

1cup.

7.2Drawing off espresso/extra coffee

Place 1 cup under the coffee-spout (9) .

Press the draw-off symbol until three dots light up to the

left of the symbol.

This draw-off of espresso / extra coffee is only possible for 1 cup.

7.3 Drawing off powder coffee

Press the selector switch. The and symbols light up.

Now put 1 or 2 level measuring spoons of pre-ground coffee into the filler funnel for pre-ground coffee (10).

Place 1 or 2 cups under the coffee-spout (9) and press the required coffee key.

Never use water-soluble instant coffee or quick coffee. We recommend that you only use powder from freshly ground coffee beans or pre-ground, vacuum-packed coffee. Never put more than 2 portions of coffee in. The filler funnel is not a storage container.

10

Image 10
Contents Impressa E40 Impressa E60 Impressa E65 Jura Impressa E40/E60/E65 Page Operating elements Jura Impressa E40/E60/E65 Contents Important information for the user Symbols meanDescription Preparation of the machine Checking the mains voltage Safety instructionsSafety precautions Checking the fuseAdjusting the grinder Adjusting the water hardnessAdjustable automatic switch-off First start of operation Fill system with waterDrawing off espresso/normal coffee Adjusting the water quantityRinsing the machine Drawing off espresso/strong coffeeReturn to stand-by Switching machine offDrawing off steam Drawing off hot waterEmpty grounds container Care and maintenance Fill waterClean unit No drip trayRegular service General cleaning instructionsReplace filter Cleaning Empty systemDescalcifying Disposal Tips for perfect coffeeMessages Display Cause ActionProblems Problem Cause ActionTechnical data Legal information