11. Care and maintenance
11.1 Fill water
When the 
display lights up, no
11.2 Empty grounds container
The grounds container collects the coffee grounds. When this dis-
play 
lights up, no
Push the coffee spout (9) up.
Remove the drip tray. Be careful, as there is water in it.
Empty and clean the drip tray and the grounds container (Fig. 6). Push the drip tray and then the grounds container back in (Fig. 7).
The drip tray must also be emptied when you empty the grounds.
11.3 No drip tray
If the 
symbol flashes, the drip tray has not been inserted properly.
If the drip tray has not been put into the machine, you can clean the interior of the machine. Wipe out any coffee powder that might be in the machine with a damp cloth. Put the drip tray back in again.
11.4 Clean unit
After 200 
symbol flashing announces this. You can continue to draw off coffee or hot water/steam. We recommend carrying out the cleaning (as described in point 12) within the next few days.
Warning lamp 
does not go out until the complete cleaning prozess has been carried out.
11.5 Unit scaled
Scale is caused by using the machine and depends upon the hardness level of your water. The machine recognises the necessity of 
symbol tells you when 
does not go out until the complete decalcifying prozess has been carried out.
11.6 Use of Claris filter cartridges
If the Claris filter cartridges are used correctly, your machine no longer needs
11.7 Insert filter
Pull up the cartridge holder in the water tank. Pressing gently, put the filter cartridge into the water tank (Fig. 4).
Close the cartridge holder until it engages audibly.
Fill the water tank with cold fresh tap water and put it back into the machine.
12