Jura Capresso S90 Care and maintenance Fill water, Empty grounds container, Empty drip tray

Page 16

If a mistake occurs while programming one of the above settings, just press key N and the chosen setting moves back to its original standard setting.

14. Care and maintenance

14.1 Fill water

 FILL WATER

If this message shows on the display no more coffee can be drawn off. Top up water.

The water tank should be rinsed and filled with fresh water daily. Only use fresh, cold water. Never top up with milk, mineral water or any other liquids. You can top up water without removing tank.

14.2 Empty grounds container

Coffee grounds are collected in the grounds container (23).

 EMPTY GROUNDS

If this message shows on the display no more coffee can be drawn off. It is necessary to empty the grounds container.

Remove drip tray carefully as there is water in it.

Do not disconnect the machine from power socket while you empty grounds.

14.3 Empty drip tray

 EMPTY TRAY

If this message shows on the display no more coffee can be drawn off. It is necessary to empty the drip tray.

Remove drip tray carefully as there is water in it.

14.4 Fill beans

 FILL BEANS

Fill beans as described in chapter 3.3.

The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose.

14.5 Removing foreign objects

Switch off your machine by pressing ON/OFF key .

Remove plug from power socket.

Open bean container (13) and remove the beans. The remaining beans can be removed with a vacuum cleaner.

Loosen both screws in the bean container and then remove container (Fig.5 + 6)

Remove any remaining beans with a vacuum cleaner.

Put the spanner on (Fig.7).

Now turn spanner anticlockwise until the foreign object loosens.

Remove remaining powder with a vacuum cleaner.

Replace bean container and fasten screws.

14.6 Clean machine

 CLEAN UNIT

After coffee, etc., has been drawn off 220 times or after 180 rinsing programs have been run, the machine must be cleaned. You can continue to draw off coffee and hot water / steam. However we recommend that you clean the machine (as described in chapter 15) within the next few days.

 CLEAN NOW

An acoustic signal indicates the need of an immediate cleaning.

16

Image 16
Contents Impressa S90/S95/S9 Impressa Jura Impressa S90/S95/S9 Page Page Instructions for use Programming keysTable of contents Safety instructions Safety precautionsImportant information for the user DescriptionAdjusting grinder Check before use Checking mains voltageChecking fuse Adding coffee beansAdjusting for water hardness Rinsing the machineUse of Claris filter cartridges Placing filterReplacing of filter Drawing off coffee Press KEY / Powder Quantity  Rinse Filter / Press SteamDrawing off powder coffee Drawing off hot waterDrawing off steam Frothing up milk with the Auto-CappuccinoCleaning the Auto-Cappuccino Switching off machineConstant frothing up of milk ProgrammingProgramming coffee temperature Programming powder quantityProgramming water quantity  PowderProgramming economy mode Programming steam portionProgramming tea portion Programming FilterProgramming timer clock Programming automatic switch on timeProgramming language selection Program key NCare and maintenance Fill water Clean machineEmpty grounds container Empty drip trayCleaning metal contacts General cleaning instructionsCleaning Unit calcifiedDecalcifying  Empty Tray  Agent in Tank Press Calc  Empty Tray  Fill WaterDisposal Tips for a perfect coffeeMessages Problems Clean UnitFault Unit CalcedTechnical specifications Legal information
Related manuals
Manual 22 pages 22.61 Kb Manual 6 pages 49.41 Kb